--A veteran governor! Build a garage Seyo !!
--A crane for the hexagear block base is now available !!
-It consists of three units, [Crane unit], [Garder unit], and [Running rail unit]. By combining with the included two types of 75mm x 150mm base plates for floor and wall, this kit alone can be used. You can immediately create a base or factory using a crane and play with it.
――The [winding machine] of the crane unit uses a real metal chain, and you can use the attached rod to raise and lower the suspended object.
--The crane unit can be moved vertically and horizontally by the girder unit and the traveling rail unit. The girder unit and running rail unit can be connected and extended, and can correspond to the size of the block base made by the user.
--Use hooks and eyebolts (hanging rings) to connect the crane to the object. Connect the 3mm shaft of the eyebolt to the object, hook the hook, and hang the hook string on the crane.
――By using the 3mm hole in the crane unit, it can be used as a single crane part and can be used for heavy machinery.
* The load capacity of the crane is assumed for the entire Hexa Gear series.
--The floor and wall sizes are standardized to 75 mm x 150 mm, respectively. The floor and walls can be rearranged horizontally and vertically to enjoy the stage according to your favorite situation.
――You can freely build floors and walls using 4 types of attachments, and if you use more than one, you can build barricades, hierarchical structures, and mezzanines.
――Various scenes can be produced by combining with the separately sold DX head quarter, panel option A, and lift option A.
・ Crane unit x 1
・ Gada unit x 1 set
・ Travel rail unit x 1 set
・ Rod x 1
・ Hook x 6
・ Eyebolt x 6
・ Hexagram for eyebolts x 6
・ Hexagram x 16
・ String x 3
・ Floor panel x 4
・ Wall panel x 14
・ Joint A x 60
・ Joint B × 60
・ Joint C × 84
・ Joint D × 84
--Design: KOTONUKIYA, Yuichi Kuwamura
--Size: Approximately 150 x 75 mm (1 panel)