Mugen Seiki E2018 MGT7 ECO

Save 10%
Mugen SeikiMugen Seiki E2018 | 

Price:
Sale price¥64,350 Regular price¥71,500

Description

** Please allow 2-3 working days to ship the products**

Mugen Seiki is proud to introduce the MGT7 ECO electric On-Road GT Car! 

The MGT7 ECO is based off the MBX7 Nitro buggy World championship platform, but with many new parts to make it a full race ready GT on road car!


httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_01jpg
httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_02jpg


httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_14jpg
httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_13jpg
httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_12jpg


httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_11jpg

httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_10jpg

httpwwwmugenseikicomimagesmgt7_ecomgt7-eco_09jpghttpwwwmugenseikicomimagesmgt7_ecomgt7-eco_08jpg


 

E2018 - MGT7 ECO Electric On-Road GT Car
The MGT7E front and rear shock towers were designed to optimize the handling and tuning of the 16mm shocks and to provide traction and smooth handling on asphalt. The durable front and rear gear differentials will handle any high-powered nitro engines and keep the MGT7E under full control. The drive train is very efficient with CVA’s drive shafts through out the kit. The combination of the high quality differentials and super efficient drive train allows the MGT7E to carry high speeds on the straights and through the corners.


Specially designed front and rear body mounts with full adjustability to allow the fit of most bodies. The large front plastic bumper with foam protector will help keep the front of the body front tucking during hard impact. Tough side guards keep both your pipe and radio gear protected from high speed on road racing.

The MGT7E is equipped with a specially designed battery tray that will accept two 2S LiPo batteries in a staggered mounting position for optimum weight distribution or a single 4S Lipo battery configuration. The newly designed motor mount allows you can run higher KV electric motors without worrying about flex and gear mess problems.  The heavy-duty sliding motor mount is anchored down with 4mm screws for extra strength.  Mugen also offers optional pinion and spur gears for so you can fine-tune your MGT7E for maximum performance in any track condition.

Mugen has combined the best components from both our off-road and on-road lines to create the MGT7E.  The MGT7E is the ultimate electric powered grand touring car….the MGT7E!!!


MGT7 ECO Features:
- Straight cut 13T bevel gear and 44T conical gears - Front/Rear 16mm hard anodized threaded shocks with 3.5mm shock shafts  - Specially designed front/rear shock springs - 3mm A7075 aluminum chassis - 4mm A7075 aluminum front/rear shock towers - 5mm A7075 aluminum lower suspension mounts for optimized geometry - A7075 aluminum motor mount housing A - A7075 aluminum motor mount B - Specially designed front/rear body mounts - New front bumper and foam protector


MGT7 ECO Technical data:
- Length:
494mm
- Width:
305mm
- Weight:
Approx. 3,300gr (without battery)
- Gear ratio:
8.27
- Wheelbase:
325mm

Differentials Oils:
Front - 300,000 wt Oil (B0347)
Center - 300,000 wt Oil (B0347)
Rear - 50,000 wt Oil (B0319)


Shocks, Springs, and Sway Bars: Front:
600 wt Oil (B0326) / ?2.2 L40/5.25T Spring (E2545) / ?1.35 5H Piston (E2534) / ?2.7mm (E2136)
Rear:
600 wt Oil (B0326) / ?2.2 L40/5.25T Spring (E2545) / ?1.35 5H Piston (E2534) / ?2.6mm (E0176)

 
Other necessary equipment: 2ch radio set for RC car (Transmitter, Receiver, Servo)/Batteries for Transmitter/Electric Motor/ESC (Electric Speed Controller)/Batteries for RC Car/Charger/Body/Body paint tools/Ties & Wheels
*The contents are subject to change without notice due to product improvements and specification changes.
*Final production version of product may and will differ from appearance of product shown on this web page.

 

 

 

You may also like

Recently viewed