Description
The main aircraft carrier of the Nankumo Mobile Forces, Kaga, has been reintroduced with new parts.
Products are unpainted kits that require glue assembly and painting.
The scale is 1/700, and the bottom of the ship is not included.
This product is composed of traditional (special series) molds and newly designed additional parts.
The Aircraft Carrier Kaga was built as an airline carrier instead of Tenjo damaged by Akagi and Tenjo in the Washington Army Confirmation to be an aircraft carrier.
It was initially advanced as the first Kaga-type Battleship, but it was modified just like Akagi.
It was a unique ship shape with 3 levels of flight deck, but in 196 to 10, it was redesigned to be an airplane carrier with a full department.
After that, it became the flagship force of the Japanese Navy and participated in the Pacific War Pearl Gang attack and Indian operations. This bullet was covered by the attack of the US aircraft carriers in the Midway Isle attack in June 17.
It has been fired by fleet planes and equipped bombs/torpedos. It was put into the last war on the fire.
The product is based on the appearance of the attack of Pearl Wan in December 16, and during the attack of Midway Island in June 17.
The marking of the flying deck (decal) is available in 1966.
It also has markings for identifying enemy allies on the flight deck during the MI operations in June 17, and can also be used during Midway Island.
We have newly designed parts to unify the differences in the reproductions of equipment depending on the production date of the product, and some parts have been divided into consideration of the painting process.
The 5.0 inch (12.7 cm) consecutive high angle gun A model has been subdivided into all 4 parts, increasing the resolution of the modeling from the 2 parts of the existing product.
The 5.0 inch (12.7 cm) Consecutive High Angle Cannon A Type A 2 with a smoke shield has been subdivided into all 4 parts for improved modeling resolution.
The 9.5 yd (9 m) cutter on the short board has been made into 2 parts for painting in mind. The top board comes with separate parts, so you can choose from one piece of the top board.
The 12 meter aircraft takes into account the painting of the canvas, the pilot room/machine canopy is made into separate parts. Each coat is applied and assembled and bonded to a later period of time.
The 11 meter internal firearms have been made with paint in mind similar to 12 meter aircraft, and the shipper/machine canopy are separated parts.
The 3 part configuration allows the vehicle to be assembled and assembled after painting to eliminate the need for masking.
The 12-meter inner lunch can also be represented without canvas.
The aircraft cradle is made with a mold that has uneven shapes and light holes, making it more precise to the model.
A new chrysanthemum crest of the ship neck.
Includes decals for the Kantail ship name (warship color coloured mushing tone) and the Kantail flight deck posts / white lines.
The 96 type 1.0 inch (25 mm) consecutive aircraft guns have reduced paint and painting work as standard specifications.
The hull is a part structure with left and right sidewalls that are integrated with the front and rear independent storage compartments.
The fender side reproduces many fender windows and a complex shaped storage side wall.
The flight deck is a single piece structure with a delicate wood deck and a wind shielding fence, and the front and back of the front and back.
The flight deck supports can be reproduced with 4 posts after remodeling and 6 posts.
The elevator is a separate part from the flying deck part.
The chimney is made of 2 parts that can be glued up and down.
The floor surfaces such as high angle cannons and fender passages are detailed with a strip pattern.
The truss column on the back of the flying deck stand is sculpted on 4 sides.
The Kanbridge includes binocular telescope parts for increased precision.
The kantai aircraft comes with 15 aircraft each, including 5 of each Zero Battle 21, 99th Battleship, and the 97th battle. The molded color is gray.
The 1.0 inch (25 mm) consecutive weapon has a precise model and is easy to paint and comes with 2 parts and a standard 2018 mold parts.
The color of the molding is gray molded with main parts and bottom boards, fleet machines, aircraft parts, etc.
Comes with 3 types of decals
Includes 1 decal for marking aircraft
Includes 2 decals for the white line of the Kantail ship and deck posts.
Flying deck markings, battleship flag, flight deck / ally identification mark (Hinamaru) during MI operations in June 17.
Included Accessories:
Runner x 51
Assembly instructions x 1
Decal x 4
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.
Products are unpainted kits that require glue assembly and painting.
The scale is 1/700, and the bottom of the ship is not included.
This product is composed of traditional (special series) molds and newly designed additional parts.
The Aircraft Carrier Kaga was built as an airline carrier instead of Tenjo damaged by Akagi and Tenjo in the Washington Army Confirmation to be an aircraft carrier.
It was initially advanced as the first Kaga-type Battleship, but it was modified just like Akagi.
It was a unique ship shape with 3 levels of flight deck, but in 196 to 10, it was redesigned to be an airplane carrier with a full department.
After that, it became the flagship force of the Japanese Navy and participated in the Pacific War Pearl Gang attack and Indian operations. This bullet was covered by the attack of the US aircraft carriers in the Midway Isle attack in June 17.
It has been fired by fleet planes and equipped bombs/torpedos. It was put into the last war on the fire.
The product is based on the appearance of the attack of Pearl Wan in December 16, and during the attack of Midway Island in June 17.
The marking of the flying deck (decal) is available in 1966.
It also has markings for identifying enemy allies on the flight deck during the MI operations in June 17, and can also be used during Midway Island.
We have newly designed parts to unify the differences in the reproductions of equipment depending on the production date of the product, and some parts have been divided into consideration of the painting process.
The 5.0 inch (12.7 cm) consecutive high angle gun A model has been subdivided into all 4 parts, increasing the resolution of the modeling from the 2 parts of the existing product.
The 5.0 inch (12.7 cm) Consecutive High Angle Cannon A Type A 2 with a smoke shield has been subdivided into all 4 parts for improved modeling resolution.
The 9.5 yd (9 m) cutter on the short board has been made into 2 parts for painting in mind. The top board comes with separate parts, so you can choose from one piece of the top board.
The 12 meter aircraft takes into account the painting of the canvas, the pilot room/machine canopy is made into separate parts. Each coat is applied and assembled and bonded to a later period of time.
The 11 meter internal firearms have been made with paint in mind similar to 12 meter aircraft, and the shipper/machine canopy are separated parts.
The 3 part configuration allows the vehicle to be assembled and assembled after painting to eliminate the need for masking.
The 12-meter inner lunch can also be represented without canvas.
The aircraft cradle is made with a mold that has uneven shapes and light holes, making it more precise to the model.
A new chrysanthemum crest of the ship neck.
Includes decals for the Kantail ship name (warship color coloured mushing tone) and the Kantail flight deck posts / white lines.
The 96 type 1.0 inch (25 mm) consecutive aircraft guns have reduced paint and painting work as standard specifications.
The hull is a part structure with left and right sidewalls that are integrated with the front and rear independent storage compartments.
The fender side reproduces many fender windows and a complex shaped storage side wall.
The flight deck is a single piece structure with a delicate wood deck and a wind shielding fence, and the front and back of the front and back.
The flight deck supports can be reproduced with 4 posts after remodeling and 6 posts.
The elevator is a separate part from the flying deck part.
The chimney is made of 2 parts that can be glued up and down.
The floor surfaces such as high angle cannons and fender passages are detailed with a strip pattern.
The truss column on the back of the flying deck stand is sculpted on 4 sides.
The Kanbridge includes binocular telescope parts for increased precision.
The kantai aircraft comes with 15 aircraft each, including 5 of each Zero Battle 21, 99th Battleship, and the 97th battle. The molded color is gray.
The 1.0 inch (25 mm) consecutive weapon has a precise model and is easy to paint and comes with 2 parts and a standard 2018 mold parts.
The color of the molding is gray molded with main parts and bottom boards, fleet machines, aircraft parts, etc.
Comes with 3 types of decals
Includes 1 decal for marking aircraft
Includes 2 decals for the white line of the Kantail ship and deck posts.
Flying deck markings, battleship flag, flight deck / ally identification mark (Hinamaru) during MI operations in June 17.
Included Accessories:
Runner x 51
Assembly instructions x 1
Decal x 4
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.