Description
This product has been reintroduced with new parts and parts that were the last part of Haruna in the Pacific War.
Products are unpainted kits that require glue assembly and painting.
The scale is 1/700, and the bottom of the ship is not included.
This product is composed of traditional (special series) molds and newly designed additional parts.
Haruna Battleship is the oldest Kongo type of the 5 types of battleships in the Pacific War and was made in Kawazaki Shiyaki, Kobe, in 1944.
With a total length of 78.6 ft (222 m) and a total width of 104 ft (29.04 m) and the main gun is equipped with 8 14.0 inch (45 cm) cannons and a high-speed battleship with a speed of 30.5 kt after 2 renovations.
With the opening of the Pacific War, he joined the Southern Attack and Mobile Forces to join the Indian operations.
In the Defense of Ga Island, the 3rd KanColle Haruna was engaged in many operations that have remained in history.
The participation in the Laute Offshore Sea Battle (Ayichi Operation) returned to the inner land, and the battle was overflowing by the air attack in July 20, 19.
The product is based on the motif of the Kongo-type battleship Haruna, October 19 Issue – Shuichi – the most air-fighting weapons.
The top of the kanbridge has a No. 21 electric search and the mast is equipped with a number 13 electric probe and a number of 1.0 inch (25 mm) guns on the upper board.
・We have newly designed parts to unify the differences in the reproduction of the equipment depending on the launch of the product, and some parts have been divided into consideration of the painting process.
The No. 13 electrical search is a sculpted expression in the truss structure, and the air line part has been reproduced in a shape representation and is made from a post.
The No. 21 electric search is sculpted to the base of the insulator for fixing the element on the front and is represented in a delicate form.
The 22 electric search is made with a sliding mold, making it possible to change the opening into a part, and the wrapper shape can be extended.
The 5.0 inch (12.7 cm) consecutive high angle gun A model has been subdivided into all 4 parts, increasing the resolution of the modeling from the 2 parts of the existing product.
The 9.2 yd (9 m) cutter has been made into 2 parts for painting. The top board is equipped with separate parts, so you can choose between a single piece mold on the top.
The 12 meter aircraft takes into account the painting of the canvas, the pilot room/machine canopy is made into separate parts. Each coat is applied and assembled and bonded to a later period of time.
The aircraft cradle is made with a mold that has uneven shapes and light holes, making it more precise to the model.
A new chrysanthemum crest of the ship neck.
Includes fender lights and lifesaving indicators. The former is to uniformize the size of each ship and the latter is for additional representation of the parts that were missed.
Includes decals for the Kantail ship name (warship color painted mushy tone) and the mast white line.
The 96 type 1.0 inch (25 mm) consecutive aircraft guns have reduced paint and painting work as standard specifications.
The hull is constructed with both the left and right sides of the fleet.
The late war feature the fender window, which has been obstructed in convex molding.
The upper deck is a single piece structure of delicate wood deck sculpting.
The linoleum bed on the aviation work deck is a separate part from the top board.
The chimney is made of 2 parts that are glued on the left and right side.
The stripe pattern on the floor such as the high angle cannon is expressed with fine carving.
The funnel cap is constructed with a precise feel when removed.
The front side of the main turret is made up of a curved surface, and is made specifically for Haruna / Kirishima.
The main gun is a single piece of the barrel and the canvas and the angle of the perspective elevation is fixed
The main barrel is opened using a slide mold.
Includes 2 zero-type water observation machines, and the molded color is gray.
The 1.0 inch (25 mm) gun has a precise shape and a construction that is easy to paint and comes with a 2 part model that was used in 2018.
The color of the molding is gray molded with main parts and bottom boards, fleet machines, aircraft parts, etc.
Comes with 2 types of decals
Decals include marking on the war ship flag, sunsigna, and fleet aircraft
・We have 3 sizes of military ship flags, etc. Actual dimensions of 10, 6, and 3 width are 1/700 scale.
It includes the Hinomaru of the ship aircraft and the corresponding yellow belt (yellow band), and the Hinomaru includes those that do not have the white border during the late of the War.
Decals include watering notation, chrysanthemum crest of the ship of the ship (two types of gold and warship color filled).
Included Accessories:
Runner x 46
Assembly instructions x 1
Decal x 3
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.
Products are unpainted kits that require glue assembly and painting.
The scale is 1/700, and the bottom of the ship is not included.
This product is composed of traditional (special series) molds and newly designed additional parts.
Haruna Battleship is the oldest Kongo type of the 5 types of battleships in the Pacific War and was made in Kawazaki Shiyaki, Kobe, in 1944.
With a total length of 78.6 ft (222 m) and a total width of 104 ft (29.04 m) and the main gun is equipped with 8 14.0 inch (45 cm) cannons and a high-speed battleship with a speed of 30.5 kt after 2 renovations.
With the opening of the Pacific War, he joined the Southern Attack and Mobile Forces to join the Indian operations.
In the Defense of Ga Island, the 3rd KanColle Haruna was engaged in many operations that have remained in history.
The participation in the Laute Offshore Sea Battle (Ayichi Operation) returned to the inner land, and the battle was overflowing by the air attack in July 20, 19.
The product is based on the motif of the Kongo-type battleship Haruna, October 19 Issue – Shuichi – the most air-fighting weapons.
The top of the kanbridge has a No. 21 electric search and the mast is equipped with a number 13 electric probe and a number of 1.0 inch (25 mm) guns on the upper board.
・We have newly designed parts to unify the differences in the reproduction of the equipment depending on the launch of the product, and some parts have been divided into consideration of the painting process.
The No. 13 electrical search is a sculpted expression in the truss structure, and the air line part has been reproduced in a shape representation and is made from a post.
The No. 21 electric search is sculpted to the base of the insulator for fixing the element on the front and is represented in a delicate form.
The 22 electric search is made with a sliding mold, making it possible to change the opening into a part, and the wrapper shape can be extended.
The 5.0 inch (12.7 cm) consecutive high angle gun A model has been subdivided into all 4 parts, increasing the resolution of the modeling from the 2 parts of the existing product.
The 9.2 yd (9 m) cutter has been made into 2 parts for painting. The top board is equipped with separate parts, so you can choose between a single piece mold on the top.
The 12 meter aircraft takes into account the painting of the canvas, the pilot room/machine canopy is made into separate parts. Each coat is applied and assembled and bonded to a later period of time.
The aircraft cradle is made with a mold that has uneven shapes and light holes, making it more precise to the model.
A new chrysanthemum crest of the ship neck.
Includes fender lights and lifesaving indicators. The former is to uniformize the size of each ship and the latter is for additional representation of the parts that were missed.
Includes decals for the Kantail ship name (warship color painted mushy tone) and the mast white line.
The 96 type 1.0 inch (25 mm) consecutive aircraft guns have reduced paint and painting work as standard specifications.
The hull is constructed with both the left and right sides of the fleet.
The late war feature the fender window, which has been obstructed in convex molding.
The upper deck is a single piece structure of delicate wood deck sculpting.
The linoleum bed on the aviation work deck is a separate part from the top board.
The chimney is made of 2 parts that are glued on the left and right side.
The stripe pattern on the floor such as the high angle cannon is expressed with fine carving.
The funnel cap is constructed with a precise feel when removed.
The front side of the main turret is made up of a curved surface, and is made specifically for Haruna / Kirishima.
The main gun is a single piece of the barrel and the canvas and the angle of the perspective elevation is fixed
The main barrel is opened using a slide mold.
Includes 2 zero-type water observation machines, and the molded color is gray.
The 1.0 inch (25 mm) gun has a precise shape and a construction that is easy to paint and comes with a 2 part model that was used in 2018.
The color of the molding is gray molded with main parts and bottom boards, fleet machines, aircraft parts, etc.
Comes with 2 types of decals
Decals include marking on the war ship flag, sunsigna, and fleet aircraft
・We have 3 sizes of military ship flags, etc. Actual dimensions of 10, 6, and 3 width are 1/700 scale.
It includes the Hinomaru of the ship aircraft and the corresponding yellow belt (yellow band), and the Hinomaru includes those that do not have the white border during the late of the War.
Decals include watering notation, chrysanthemum crest of the ship of the ship (two types of gold and warship color filled).
Included Accessories:
Runner x 46
Assembly instructions x 1
Decal x 3
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.