Description
Thin blade chisel with a blade width of less than 0.04 inch (1 mm) or less for use on pin vice.
Great for sculpting details on figures and mini mechas
The Spin Blade is now available in ultra-fine sizes.
The bottom of the round hole can be easily flattened with an ultra-fine blade width of less than 0.04 inch (1 mm).
Rotate it to make small round carvings sharp.
Very easy to use as a thin blade chisel.
It is attached to the pin vise body and used as a flat processing blade at the bottom of the drill hole.
Set of 5 in sizes 0.5mm to 0.9mm.
The shaft is uniform to 0.1 inch (3 mm), so there is no need to replace the collet chuck on the pin vise itself, making it easy to replace.
Excellent compatibility with 5 drill bits set A
Because it is a blade, please handle with care when opening the lid or using it.
How to use
1. Attach the drill blade to the pin vise and dig a hole.
2. Attach the spin blade with the same diameter as the drilled hole to the pin vice.
3. The bottom of the carved hole is a spin-blade.
The bottom of the hole (drilled blade) with the same diameter drill blade can be flated.
Uniform shaft size 0.1 inch (3 mm)
Blade size: 0.02 inch (0.5 mm), 0.02 inch (0.6 mm), 0.03 inch (0.7 mm), 0.03 inch (0.8
Can also be used as a thin blade chisel
Quality Notation
Material: Special blade steel (with case)
Hole diameter: 0.02 inch (0.5 mm), 0.02 inch (0.6 mm), 0.03 inch (0.7 mm), 0.03 inch (0.8 mm), 0
・Case: PP; Shaft Thickness: 0.1 inch (3 mm); Country of Origin: Japan
⚠ Precautions
Please secure it firmly to the pin vise before use.
Please wear protective glasses to make sure there are no people around you.
If cutting or broken blade gets into your eyes, there is a risk of blindness.
Although it is made with a metal that is very hard but with excessive force or pinching, the blade edge may be damaged and cause unexpected injuries.
After use, wipe with a dry cloth and apply oil and place in the case.
As this is a blade, please be careful when injuring it.
Please do not put any load over the capacity.
When turning it, be sure to drill the guide hole with the same diameter before using.
Great for sculpting details on figures and mini mechas
The Spin Blade is now available in ultra-fine sizes.
The bottom of the round hole can be easily flattened with an ultra-fine blade width of less than 0.04 inch (1 mm).
Rotate it to make small round carvings sharp.
Very easy to use as a thin blade chisel.
It is attached to the pin vise body and used as a flat processing blade at the bottom of the drill hole.
Set of 5 in sizes 0.5mm to 0.9mm.
The shaft is uniform to 0.1 inch (3 mm), so there is no need to replace the collet chuck on the pin vise itself, making it easy to replace.
Excellent compatibility with 5 drill bits set A
Because it is a blade, please handle with care when opening the lid or using it.
How to use
1. Attach the drill blade to the pin vise and dig a hole.
2. Attach the spin blade with the same diameter as the drilled hole to the pin vice.
3. The bottom of the carved hole is a spin-blade.
The bottom of the hole (drilled blade) with the same diameter drill blade can be flated.
Uniform shaft size 0.1 inch (3 mm)
Blade size: 0.02 inch (0.5 mm), 0.02 inch (0.6 mm), 0.03 inch (0.7 mm), 0.03 inch (0.8
Can also be used as a thin blade chisel
Quality Notation
Material: Special blade steel (with case)
Hole diameter: 0.02 inch (0.5 mm), 0.02 inch (0.6 mm), 0.03 inch (0.7 mm), 0.03 inch (0.8 mm), 0
・Case: PP; Shaft Thickness: 0.1 inch (3 mm); Country of Origin: Japan
⚠ Precautions
Please secure it firmly to the pin vise before use.
Please wear protective glasses to make sure there are no people around you.
If cutting or broken blade gets into your eyes, there is a risk of blindness.
Although it is made with a metal that is very hard but with excessive force or pinching, the blade edge may be damaged and cause unexpected injuries.
After use, wipe with a dry cloth and apply oil and place in the case.
As this is a blade, please be careful when injuring it.
Please do not put any load over the capacity.
When turning it, be sure to drill the guide hole with the same diameter before using.