Description
●SXR/SSL compatible programmable servo
*CODE10 (M17, MT-5, MT-R, M12S(RS), EXZES ZZ,
Compatible with MT-44)
CODE 5(M12, EXZES Z, MT-4S, MT-4, MT-S)
does not correspond to
●MULTI SETTING GEAR compatible
●Extreme Response (SXR) mode compatible
●Supports Ultra Response (SUR) mode
●Supports super response (SSR) mode
●High response (SHR) mode compatible
●Li-Po 2 cell compatible
●High torque type
●Brushless motor adopted
-Full metal gear specification (reinforced type)
●Equipped with full aluminum case
speed
0.11sec/60°(7.4V)
0.14sec/60°(6.0.V)
torque
21.1kg・cm(7.4V)
17.9kg・cm(6.0V)
size
40.2x20.5x38.7mm
weight
72g
Product code
107A54561A
JAN code
4944683034371
price
¥28,600 (tax included)
●Compatible with SXR (Extreme Response), which realizes twice the smoothness of SUR (Ultra Response).
We achieved the world's fastest tracking performance.
By combining with compatible equipment, you can achieve amazing smoothness and detailed movements that you have never experienced before.
●MULTI SETTING GEAR support allows for functional expansion, changing and saving settings for each parameter, and firmware updates.
A date is possible.
●Compatible with SSL and telemetry. Set each parameter wirelessly in real time from a transmitter compatible with CODE10
Can be changed.
Telemetry communication of temperature, current, and volume position data inside the servo to a compatible transmitter is possible.
From PGSⅡ, the servo lead and Z connector housing have a black finish.
*To change the PGS servo settings, you need a transmitter that supports CODE10 (M17, M12S (RS), EXZES ZZ, MT-44).
SSL compatible receiver (RX-493i, RX-492i, RX-493, RX-492, RX-491, RX-472, RX-482, RX-47T)
It is possible to use a combination or MULTI SETTING GEAR.
*If you use a gyro (SGS-01C/01D) that cannot connect to SSL, you will need to configure the settings from the transmitter using the SSL function.
It cannot be changed.
■Response settings when using PGS servo
Operation response of PGS servo in SSL (Sanwa Synchronized Link) and each response mode (NOR, SHR, SSR, SUR)
The behavior is different.
When used in each response mode, set it in MULTI SETTING GEAR and then change it to CH1/CH2.
Please connect and use.
■Telemetry communication of temperature, current, voltage, and volume position data inside the servo to the transmitter is possible, so the servo
You can check the status at any time. *Initial settings in MULTI SETTING GEAR are required.
■Setting items: ◯SSL-CH (SSL channel setting) ◯STRETC (stretcher adjustment) ◯BOOST (boost adjustment)
◯D-BAND (dead band adjustment) ◯MV-MID (intermediate torque change adjustment) ◯MV-END (second half torque adjustment)
◯BRAKE (brake adjustment)
●MV-FRQ.
●MAX-PW (MAX duty adjustment)
*MULTI SETTING GEAR is required to set ●.
*Telemetry and SSL functions cannot be used when using FH5U or in SXR response mode.
*Recommended BEC current value: 3A or more
*CODE10 (M17, MT-5, MT-R, M12S(RS), EXZES ZZ,
Compatible with MT-44)
CODE 5(M12, EXZES Z, MT-4S, MT-4, MT-S)
does not correspond to
●MULTI SETTING GEAR compatible
●Extreme Response (SXR) mode compatible
●Supports Ultra Response (SUR) mode
●Supports super response (SSR) mode
●High response (SHR) mode compatible
●Li-Po 2 cell compatible
●High torque type
●Brushless motor adopted
-Full metal gear specification (reinforced type)
●Equipped with full aluminum case
speed
0.11sec/60°(7.4V)
0.14sec/60°(6.0.V)
torque
21.1kg・cm(7.4V)
17.9kg・cm(6.0V)
size
40.2x20.5x38.7mm
weight
72g
Product code
107A54561A
JAN code
4944683034371
price
¥28,600 (tax included)
●Compatible with SXR (Extreme Response), which realizes twice the smoothness of SUR (Ultra Response).
We achieved the world's fastest tracking performance.
By combining with compatible equipment, you can achieve amazing smoothness and detailed movements that you have never experienced before.
●MULTI SETTING GEAR support allows for functional expansion, changing and saving settings for each parameter, and firmware updates.
A date is possible.
●Compatible with SSL and telemetry. Set each parameter wirelessly in real time from a transmitter compatible with CODE10
Can be changed.
Telemetry communication of temperature, current, and volume position data inside the servo to a compatible transmitter is possible.
From PGSⅡ, the servo lead and Z connector housing have a black finish.
*To change the PGS servo settings, you need a transmitter that supports CODE10 (M17, M12S (RS), EXZES ZZ, MT-44).
SSL compatible receiver (RX-493i, RX-492i, RX-493, RX-492, RX-491, RX-472, RX-482, RX-47T)
It is possible to use a combination or MULTI SETTING GEAR.
*If you use a gyro (SGS-01C/01D) that cannot connect to SSL, you will need to configure the settings from the transmitter using the SSL function.
It cannot be changed.
■Response settings when using PGS servo
Operation response of PGS servo in SSL (Sanwa Synchronized Link) and each response mode (NOR, SHR, SSR, SUR)
The behavior is different.
When used in each response mode, set it in MULTI SETTING GEAR and then change it to CH1/CH2.
Please connect and use.
■Telemetry communication of temperature, current, voltage, and volume position data inside the servo to the transmitter is possible, so the servo
You can check the status at any time. *Initial settings in MULTI SETTING GEAR are required.
■Setting items: ◯SSL-CH (SSL channel setting) ◯STRETC (stretcher adjustment) ◯BOOST (boost adjustment)
◯D-BAND (dead band adjustment) ◯MV-MID (intermediate torque change adjustment) ◯MV-END (second half torque adjustment)
◯BRAKE (brake adjustment)
●MV-FRQ.
●MAX-PW (MAX duty adjustment)
*MULTI SETTING GEAR is required to set ●.
*Telemetry and SSL functions cannot be used when using FH5U or in SXR response mode.
*Recommended BEC current value: 3A or more