Description
An aluminum rear hub carrier that can be used in common with the YD-2 series. Using a universal shaft with a short axle shaft for narrow scrubs, universal his joint pin position is set to the outside as much as possible, and by moving closer to the outer suspension arm pin, the suspension movement is activated and more direct movement is achieved. It will be possible. The conventional universal shaft can also be used by adding spacers, so you can feel the difference in movement depending on the combination. This rear hub carrier set is also characterized by the ability to select the mounting position of the upper / lower arm, and by making the upper side a separate part, the length of the upper arm can be changed to variable, and the change in the ground plane during rolling is controlled. It is easy to use and is an effective setting point especially on road surfaces such as P tiles. Since the mounting height of the lower arm can be selected from 4 positions, the setting range of the roll center is greatly expanded, and it is excellently compatible with weight adjustment around the rear.
* If you use the suspension arm mounting hole on the bottom side, the suspension arm and the inside of the wheel may interfere depending on the type of wheel. All mounting positions are available for Racing Performer RP-6313 series wheels.