Please Note: This is a PRE-ORDER.
Your order will be shipped as soon as the pre-order item arrives in stock. If your order includes both in-stock and pre-order items, the entire order will be held and shipped together once the pre-order item becomes available.
About Stock Arrival:
Some pre-order items are limited in quantity or may have Reduced production by the manufacturer.
Because of this, we might not receive the full amount we ordeRed.
If this happens, we’ll ship items in the order pre-orders were placed. (first-come, first-served basis)
If your order isn’t fulfilled in the first shipment, it will automatically move to the next batch.
Important Notes:
for some limited items or items with no restock plans, we may have to cancel your order.
Even if you pre-order early, we can’t guarantee your item will ship in the first batch.
About Release Dates:
Release dates or periods (if announced by the manufacturer) are shown on the product page.
However, release dates may be delayed due to the manufacturer’s circumstances.
Please treat release dates as estimates only.
Estimated Arrival (ETA): End of August 2026
PO closes on 2nd August 2026
~~~
Instant Digital Ride Height HEIGHT GAUGE RX
Achieve instant, precise ride height measurements for your RC car with the HiTEC Instant Digital Height Gauge RX. This rechargeable, high-rigidity metal-bodied tool delivers accurate readings from 2 to 38mm with effortless speed. Elevate your setup consistency and driving performance with professional-grade measurement precision every time.
Key Features
-
Metal body construction ensures rigidity, durability, and long-term accuracy
-
USB Type-C rechargeable 150mAh battery charges in approximately 130 minutes
-
Continuous use up to 5 hours for reliable indoor and outdoor pit work
-
High-precision measurement accuracy of ±0.3mm (≤20mm) and ±0.5mm (>20mm)
-
Large display with 180° inversion for easy reading from any angle
-
Wide compatibility from 1/24 to 1/8 scale, on-road and off-road vehicles
-
Dual units supports mm and inch measurement modes
-
Automatic power off after 300 seconds to conserve battery
Why Choose This
Serious RC racers know that consistent ride height is critical for predictable handling and lap times. This digital gauge delivers instant, repeatable accuracy with rugged metal construction that withstands heavy pit use. The rechargeable battery, large readable display, and broad scale compatibility make it indispensable for any dedicated racer.
Product Information
-
Measurement Range: 2.0 – 38.0 mm
-
Units: mm / inch (switchable)
-
Accuracy: ±0.3 mm (≤20 mm) / ±0.5 mm (>20 mm)
-
Power Supply: Built-in 150mAh lithium battery (rechargeable)
-
Charging Terminal: USB Type-C
-
Charging Input: DC 5V / 0.15 – 0.6A
-
Charging Time: Approximately 130 minutes
-
Usage Time: Approximately 5 hours (maximum)
-
Dimensions: 105 × 29 × 26.3 mm
-
Auto Power Off: 300 seconds (5 minutes)
-
Set Contents: Main unit, Calibration block, Instruction manual
The HiTEC Digital Height Gauge RX is the ultimate tool for precision ride height management. Its rugged metal build, rechargeable convenience, and crystal-clear display ensure you dial in your setup perfectly every session. Available in Silver or Red—choose your style and measure with confidence.
(PO AUG 2026) HiTEC 44371 Instant Digital Ride Height HEIGHT GAUGE RX (Silver)
(PO AUG 2026) HiTEC 44372 Instant Digital Ride Height HEIGHT GAUGE RX (Red)
AC Balance Charger/Discharge
(PO AUG 2026) HiTEC 44373 AC Balance Charger/Discharger X1 Pocket EX
Experience professional-grade charging power in an astonishingly compact design with the HiTEC X1 Balance Charger. This mighty 65W/10A AC charger delivers precise balance charging, storage modes, and internal resistance measurement. Redefine your charging expectations with a unit that proves size never limits performance.
Key Features
-
65W / 10A high-power AC charging for rapid, efficient battery care
-
Wide battery support for LiHV, LiPo, Li-ion, LiFe, NiMH, NiCd, and Pb
-
Multiple charging modes including balance, storage, and discharge
-
Internal resistance measurement and battery meter for health monitoring
-
DC power mode up to 65W for powering RC accessories (6-17V input)
-
XT60 input ensures stable high-current charging performance
-
Compact dimensions 84 × 84 × 45.3 mm defies conventional AC charger size
-
User-friendly interface with clear status display
Why Choose This
Serious RC enthusiasts demand reliable charging without cluttering their pit space. The X1 delivers full 65W performance in a footprint that redefines compact charging. With multi-chemistry support, advanced battery analysis, and DC output for accessories, this charger offers exceptional versatility and professional-grade precision.
Product Information
-
Compatible Batteries: LiPo / LiFe / Li-ion / LiHV (2-4 cells), NiMH / NiCd (6-8 cells), Pb (3S/6S)
-
Input Voltage: AC 100V-240V (50/60Hz)
-
Charging Power: 65W (±10%)
-
Charging Current: Li-xx/Ni-xx 0.1A-10A / Pb 0.8A-10A
-
Balance Current: Maximum 500mA (Li-xx)
-
Discharge Power: 10W (±15%)
-
Discharge Current: 0.1A-2A
-
DC Power Supply: 6V-17V (±5%), 0.5A-9A, 65W (±10%)
-
Dimensions: 84 × 84 × 45.3 mm
-
Set Contents: Main unit, AC input cable, Quick start guide, XT60 to Tamiya connector charging cable (1)
The HiTEC X1 redefines what a compact AC charger can achieve with its powerful 65W output and comprehensive battery management. From balance charging to internal resistance analysis, this charger delivers professional performance in every session. Elevate your charging game today with this remarkable powerhouse.
~~~
(PO AUG 2026) HiTEC 44374 AC Balance Charger/Discharger X2 V Pocket
Revolutionize your pit charging with the HiTEC X2 V Pocket, a dual-channel 120W powerhouse in a remarkably compact design. This intelligent charger independently manages two batteries simultaneously with precision balance, storage, and discharge modes. Experience unprecedented charging efficiency that transforms your preparation routine.
Key Features
-
Dual-channel independent control with 60W x 2 for simultaneous charging
-
Wide battery support for LiHV, LiPo, Li-ion, LiFe, NiMH, NiCd, and Pb
-
Multiple Li-series modes including Balance, Charge, and Storage
-
Front-mounted XT60 and balance terminals for smooth, accessible connections
-
DC power mode (6-17V / 0.5-6A) for powering RC accessories
-
Pocket-sized design redefines dual charger portability
-
Balance current maximum 500mA for precise cell balancing
Why Choose This
Serious RC pilots and racers know time is precious, and the X2 V Pocket doubles your charging efficiency without doubling your space. Independently charge different battery types simultaneously while the front-layout terminals ensure effortless connections. This palm-sized marvel delivers professional dual-channel performance that fits anywhere.
Product Information
-
Compatible Batteries: LiPo / LiFe / Li-ion / LiHV (2-4 cells), NiMH / NiCd (6-8 cells), Pb (3S/6S)
-
Input Voltage: AC 100V-240V (50/60Hz)
-
Charging Power: 60W x 2 (±10%)
-
Charging Current: Li-xx/Ni-xx 0.1A-6A / Pb 0.8A-6A
-
Balance Current: Maximum 500mA (Li-xx)
-
DC Power Supply: 6-17V (±0.2V) / 0.5-6A (±10%)
-
Storage Discharge Current: Maximum 500mA (via balance port only)
-
Dimensions: 90 × 70 × 106 mm
-
Package Contents: X2 V Pocket main unit, AC input cable, Quick start guide
The HiTEC X2 V Pocket shatters the myth that dual chargers must be bulky and cumbersome. Independently charge two batteries with professional precision while enjoying true pocket-sized convenience. Elevate your field charging setup today and never waste valuable track or flight time again.
