Kawada FOC10 BALL BEARING SET FOR Tamiya C-CAR
The sintered metal and plastic bearings that come standard with the kit are
converted into ball bearings!! Complete bearing set with just this one item!!
This set converts Tamiya C-cars into full ball bearings.
The set includes four 1150 bearings (5x11x4mm) for the front wheels and three 1280 bearings (8x12x3.5mm) for the differential.
*The 1260 bearings (6x12x4mm) for the axles are included in the C-car kit and are therefore not included with this product.
[What's included in the product]
●4 x 1150 bearings (5x11x4mm)
●3 x 1280 bearings (8x12x3.5mm)
Kawada FOC11 M4 HEX SCREW SET FOR Tamiya C-CAR
The M4 screws on the front have been changed to HEX screws for easier maintenance!!
This is a set of steel M4 size hexagonal flat head screws that are ideal for the front of Tamiya C-cars. (The standard kit is a Phillips head screw)
Not only does this improve maintainability, but it also increases the rigidity of the front.
By shortening the standard length of 42mm to 40mm, it becomes flush with the top surface of the nut, resulting in a stylish finish.
[What's included in the product]
●2x M4 x 25mm flat head screws (steel)
●4x M4 x 40mm flat head screws (steel)
Kawada FOC13 CERAMIC BALL FOR Tamiya C-CAR
Master the core of DD cars!!
High-precision ceramic balls with excellent roundness and surface strength!!
These φ3mm ceramic diff balls are ideal for the ball diff of Tamiya C-cars.
We have selected high-grade ceramic balls with excellent roundness and surface strength.
They are essential for creating smooth, non-slip diffs.
[Product Includes]
φ3mm ceramic diff balls x 6
Kawada FOC14a INCH SPUR GEAR ADAPTER
This is a spur gear adapter that allows you to attach standard spur gears with an inner diameter of φ9.525mm (3/8"), such as our Super Tough Spur Gear, to the φ8 differential shaft of Tamiya C-cars and F103s.
By attaching a standard spur gear with an inner diameter of φ9.525mm (3/8"), you can set the gear ratio precisely.
The adapter is made with ultra-high precision cutting of Duracon, which has low sliding resistance, in pursuit of precision and good sliding.
The spur gear fits securely into the shaft, yet when passed through it, it rotates smoothly without any rattle, resulting in an ultra-high precision finish.
*Please apply a thin layer of grease to the contact area between the shaft and the conversion adapter before use.
*The adapter can be used repeatedly, but if it becomes worn after repeated driving, we recommend replacing it with a new one.
*For spur gears and pinion gears, please choose our Super Tough Spur Gears and Carbide Duracon Pinion Gears, which have excellent precision and quality.
You can also use the super differential gear with 18 diff balls, which is effective when using a high-power motor.
