Please Note: This is a PRE-ORDER.
Your order will be shipped as soon as the pre-order item arrives in stock. If your order includes both in-stock and pre-order items, the entire order will be held and shipped together once the pre-order item becomes available.
About Stock Arrival:
Some pre-order items are limited in quantity or may have reduced production by the manufacturer.
Because of this, we might not receive the full amount we ordered.
If this happens, we’ll ship items in the order pre-orders were placed. (first-come, first-served basis)
If your order isn’t fulfilled in the first shipment, it will automatically move to the next batch.
Important Notes:
for some limited items or items with no restock plans, we may have to cancel your order.
Even if you pre-order early, we can’t guarantee your item will ship in the first batch.
About Release Dates:
Release dates or periods (if announced by the manufacturer) are shown on the product page.
However, release dates may be delayed due to the manufacturer’s circumstances.
Please treat release dates as estimates only.
Estimated Arrival (ETA):
ETA: Mid NOV 2025
MZT101-2X
MZT102-2X
MZT103-2X
ETA: DEC 2025
R246-1321HW
MZW710-SB
PO Closes 25th OCT 2025
~~~
Discover a new dimension of grip and control for your Mini-Z with the latest "2X" compound tire lineup. These newly developed tires bridge the gap between traditional 20 and 30-degree compounds, offering a balanced performance profile to fine-tune your racer's handling for competitive or casual driving.
Key Features
-
Features a newly formulated "2X" compound for characteristics between 20 and 30-degree tires.
-
Lineup includes the popular Super Low Height Slick front tire.
-
Offers both narrow and wide radial rear tire options to suit different track conditions and driving styles.
-
The MZT101-2X super low height model is approved for use in the Mini-Z Cup with free diameter rules.
-
Installation of the super low height front tires requires double-sided tape.
The Right Tire for Your Setup
This focused lineup provides the critical options needed to optimize your Mini-Z's performance. Whether you need the precise steering response of the super low-height front slick or the traction balance of the narrow versus wide radial rears, this range lets you dial in your car's behavior with professional-grade components, giving you a tangible advantage on the track.
Product Information
-
Product: Kyosho MINI-Z "2X" Compound Tires
-
Options: MZT101-2X (Slick), MZT102-2X (Radial), MZT103-2X (Radial Wide)
-
Contents: 4 tires per pack
Select from this advanced tire series to significantly improve your lap times and driving consistency, making your Mini-Z a more formidable and responsive competitor.
(PO NOV 2025) Kyosho MZT101-2X NEW Super Low Height Slick "2X" (4 pieces)
(PO NOV 2025) Kyosho MZT102-2X NEW MINI-Z Racing Radial "2X" (4 pieces)
(PO NOV 2025) Kyosho MZT103-2X NEW MINI-Z Racing Radial Wide "2X" (4 pieces)
(PO DEC 2025) Kyosho R246-1321HW NEW Brass H Plate Holder for MR-04 0.5/0/0.75mm
Fine-tune your MR-04's handling with a critical upgrade that influences both weight distribution and suspension geometry. This set of three brass H-plate holders offers a tangible method to adjust your chassis' roll characteristics, giving you direct control over its cornering behavior.
Key Features
-
Includes three holders with distinct lengths, engraved -0.5mm, 0mm, and +0.75mm.
-
Crafted from brass, a material with a higher density than aluminum, for a lower center of gravity.
-
Directly alters the contact point with the rear suspension plate to modify roll stiffness.
-
Each holder has a specific weight, contributing differently to overall chassis balance.
-
Designed for full compatibility with the Mini-Z MR-04 and MR-03 chassis.
Gain a Mechanical Edge Through Precision Tuning
This component addresses a fundamental aspect of chassis tuning that generic parts often overlook. By swapping between the three provided holders, you can make fine adjustments to how the car transitions into and through corners, finding the optimal balance between stability and agility for any track layout. The added benefit of brass construction further settles the chassis, providing a dual advantage in your pursuit of a perfectly dialed-in setup.
Product Information
-
Product: Kyosho R246-1321HW Brass H Plate Holder Set
-
Compatibility: Mini-Z MR-04, MR-03
-
Contents: 3 Holders (0.5mm / 0mm / 0.75mm)
Select this tuner set to make precise, repeatable adjustments to your car's handling, a simple change that can yield a significant improvement in lap time consistency and driver confidence.
(PO DEC 2025) Kyosho MZW710-SB NEW Suspension Balls for Aluminum Steering Blocks (4 pieces)
Refine your Mini-Z's steering response with these precision-engineered suspension balls. Designed specifically for aluminum steering blocks, they deliver exceptionally smooth movement to sharpen your car's cornering agility and overall handling precision.
Key Features
-
Machined from resin for a notably smoother action than standard aluminum balls.
-
Specifically engineered for optimal performance with aluminum steering blocks.
-
One side is 1mm thicker, allowing them to function as a 0mm type by flipping orientation.
-
A single pack contains four balls, providing enough for two complete vehicles.
-
The reduced friction directly contributes to more immediate and accurate steering input.
A Simple Upgrade with a Noticeable Impact
This component tackles the subtle friction that can dull steering feedback. By replacing standard parts with these low-friction resin balls, you eliminate a common source of stiction, resulting in a steering system that feels more direct and responsive. This simple swap is a recognized tuning step for serious racers looking to gain an edge through improved mechanical efficiency.
Product Information
-
Product: Kyosho MZW710-SB Suspension Balls
-
Compatibility: For Aluminum Steering Blocks
-
Contents: 4 pieces
Install these suspension balls to achieve a freer, more precise steering system, a fundamental upgrade that enhances your car's cornering character and driver feedback.
