New from OVERDOSE: Adjustable Type-2 Knuckles & Rear Uprights (Reproduction)

Estimated Arrival (ETA): End of OCT 2025

~~~

Adjustable Aluminum Rear Upright

This adjustable aluminum rear upright features a two-piece structure consisting of an axle mount and an upright base. This design allows for various adjustments, including toe angle, tread, and axle shaft height.

• Toe angle can be selected from 0°, 1°, or 2° by changing the screw mounting position. Its design ensures that only the toe angle changes, allowing for quantitative (precise) setting adjustments.
• Five upper arm mounting positions are available to support diverse setup options.
• Tread width can be adjusted by changing the thickness of the spacer located between the axle mount and the upright base.
• Axle shaft height can be chosen from two options (normal position and 2mm down) by simply reversing the axle mount.
• The suspension pin insertion point is equipped with a steel adapter pipe, compatible with both 2mm and 2.6mm suspension pins. This makes it installable not only on OVERDOSE chassis but also on Yokomo's YD-series chassis.
• A dedicated axle shaft is included.
  • Note: Please prepare a drive shaft that is approximately 3mm shorter than the one you are currently using.
• The use of a dedicated axle shaft optimizes drive shaft length and mounting angle, significantly contributing to improved traction performance.

OVERDOSE OD2277B Adjustable Aluminium Rear Upright

OVERDOSE OD2278B Adjustable Aluminium Rear Upright

OVERDOSE OD2279B Adjustable Aluminum Rear Upright

Adjustable Aluminum Knuckle Type-2

The Adjustable Aluminum Knuckle Type-2 is here! We've made significant improvements over the conventional model, allowing for four-stage adjustment of the kingpin angle, which was previously fixed. We've also added an adjustment function to the knuckle stopper. By reviewing the shape and structure of each part, this new knuckle is easier to use and offers a wider range of setup possibilities than ever before. It's available in three colors: purple, red, and black.

Key features include:

• Kingpin angle can be set in four stages: 0°, 3°, 5°, and 8°.
• Adjustable knuckle stopper added, preventing reverse lock or wheel interference even with increased steering angle.
• Tie rod mounting positions offer a total of 10 settings: 3 stages outward and 6 stages inward from the standard position, allowing for various Ackerman settings.
• Comes standard with a 2mm longer axle shaft.
• Trail amount is adjustable, with φ2.6 spacers included for adjustment.
• The overall body has been streamlined, reducing interference with tie rods and supporting increased steering angle.

OVERDOSE OD2437B Adjustable Aluminum Knuckle set Type-2 for RWD Purple

OVERDOSE OD2438B Adjustable Aluminum Knuckle set Type-2 for RWD Red

OVERDOSE OD2439B Adjustable Aluminum Knuckle set Type-2 for RWD Black