Please Note: This is a PRE-ORDER.
Your order will be shipped as soon as the pre-order item arrives in stock. If your order includes both in-stock and pre-order items, the entire order will be held and shipped together once the pre-order item becomes available.
About Stock Arrival:
Some pre-order items are limited in quantity or may have Reduced production by the manufacturer.
Because of this, we might not receive the full amount we ordeRed.
If this happens, we’ll ship items in the order pre-orders were placed. (first-come, first-served basis)
If your order isn’t fulfilled in the first shipment, it will automatically move to the next batch.
Important Notes:
for some limited items or items with no restock plans, we may have to cancel your order.
Even if you pre-order early, we can’t guarantee your item will ship in the first batch.
About Release Dates:
Release dates or periods (if announced by the manufacturer) are shown on the product page.
However, release dates may be delayed due to the manufacturer’s circumstances.
Please treat release dates as estimates only.
Estimated Arrival (ETA): End of NOV 2025
PO closes on 18th NOV 2025
~~~
(PO NOV 2025) REVED RD-STCA Molded Angled Ball Cap for Slim Tie Rods (2pcs)
Unlock greater steering performance with these precision-engineered angled ball caps from Reve D. Designed specifically for slim tie rods, they create valuable clearance for your steering system, letting you achieve sharper turns and smoother operation.
Key Features
-
Angled design repositions the tie rod for improved wheel clearance
-
Works with Reve D's titanium slim tie rod series
-
Built-in reinforcement ribs maintain strength and transfer servo torque effectively
-
Molded construction ensures consistent performance and durability
-
Sold as a set of two for front-end installation
Performance Benefits
-
Maximizes steering angle by reducing interference at full lock
-
Ideal for narrow scrub setups seeking aggressive turning capability
-
Optimized for use with the D1-MK-B2 Multi-Select Front Knuckle (2mm offset)
-
Enhances overall steering response and precision
Product Specifications
-
Brand: Reve D
-
Product: RD-STCA Molded Angled Ball Cap
-
Compatibility: Titanium Slim Tie Rod Series
-
Contents: 2 pieces
Push your setup to the next level of steering geometry. A simple upgrade with a noticeable impact, these ball caps are the smart choice for drivers focused on optimizing their front-end performance.
(PO NOV 2025) REVED D1-MK-B2 RDX Multi-select Front Knuckle (2.0mm offset, Base)
Refine your chassis geometry with the precision-engineered RDX Multi-Select Front Knuckle. Its strategic 2.0mm offset shifts the pivot point closer to the wheel center, delivering sharper response and smoother rotation for competitive drifting.
Key Features
-
Bearing position offset 2.0mm inward for optimized steering axis alignment
-
Two-piece construction combines a sturdy base with interchangeable upper plates
-
Reduces bearing load during aggressive steering inputs for consistent performance
-
Compatible with multiple plate styles (HIKARU, AKIRA, Type US) for tuning flexibility
-
Includes two knuckle bases and necessary mounting hardware
Performance Advantages
-
Elevates rotational accuracy by aligning the kingpin axis with the wheel centerline
-
Modular design allows quick setup changes for different tracks and driving styles
-
Improves front-end roll and traction maintenance at extreme steering angles
-
Manufactured from high-quality aluminum for lasting durability and precise fit
Product Specifications
-
Brand: Reve D
-
Product: D1-MK-B2 Multi-select Front Knuckle
-
Type: 2.0mm Offset Base
-
Compatibility: RDX Chassis
-
Note: Requires separate knuckle plate for installation
Transform your steering precision with this fundamental suspension upgrade. An essential component for serious drift enthusiasts, this knuckle system provides the foundational control needed for consistently smooth and predictable handling.
(PO NOV 2025) REVED D1-010FA2 RDX Aluminum Front Axle (2.0mm, 2pcs)
Elevate your RWD drift setup with these precision-machined aluminum front axles. Their integrated hub design and strategic 2.0mm width deliver the smooth, consistent rolling motion essential for controlled slides and sharp steering response.
Key Features
-
2.0mm width specifically engineered to match upgraded knuckle geometry
-
Single-piece construction combining axle and hub minimizes vibration and play
-
Lightweight aluminum provides strength without sacrificing responsiveness
-
All edges feature a polished Shiny Edge finish for a premium look
-
Set includes two axles for complete front-end installation
Setup Flexibility
-
Corrects scrub radius when used with the 2.0mm offset D1-MK-B2 knuckle
-
Enables the use of deep-dish or high-offset wheels for a customized stance
-
Improves front-end traction and stability during aggressive drift maneuvers
-
Maintains performance while allowing for greater aesthetic personalization
Product Specifications
-
Brand: Reve D
-
Product: D1-010FA2 Aluminum Front Axle
-
Type: 2.0mm
-
Compatibility: RDX
-
Contents: 2 pieces
Invest in the foundation of superior drift performance. By eliminating slop and optimizing geometry, these axles provide the direct connection and reliable feedback needed for competitive driving.
(PO NOV 2025) REVED D1-MK-PA Multi-select Front Knuckle Plate (AKIRA)
Fine-tune your drift character with the "AKIRA" knuckle plate, engineered to reflect the driving style of Team Reve D's own Akira Tayui. This component sharpens initial turn-in response while maintaining steering control through sustained slides, offering a distinct balance for technical courses.
Key Features
-
Adjusts kingpin angle and trail values for a specific handling profile
-
Compatible with both standard and 2.0mm offset knuckle base units
-
Manufactured from lightweight, rigid aluminum for immediate feedback
-
Designed to maximize the RDX chassis's inherent traction capabilities
-
Enhances front-end grip and road-holding during complex maneuvers
Tuning Benefits
-
Delivers quick initial response for initiating drifts with precision
-
Maintains consistent steering influence while the vehicle is sideways
-
Provides a calculated balance between agility and stability
-
Part of a modular system that allows for future setup adjustments
Product Specifications
-
Brand: Reve D
-
Product: D1-MK-PA Multi-select Front Knuckle Plate
-
Design: AKIRA
-
Compatibility: Requires D1-MK-B or D1-MK-B2 Knuckle Base
-
Note: Requires turnbuckle steering tie rod conversion for RDX
Select your steering personality. The AKIRA plate is the ideal choice for drivers seeking a connected feel to the track surface, providing the nuanced control needed to navigate challenging sections with confidence.
(PO NOV 2025) REVED D1-MK-PU Multi-select Front Knuckle Plate (Type US)
Push the limits of steering angle with the "Type US" knuckle plate, designed for aggressive wall-riding drift styles. This configuration prioritizes extreme cornering angles while maintaining stable exit speed, giving you the wide arc and control needed for technical layouts.
Key Features
-
Optimized tie-rod position prevents excessive EPA on your transmitter
-
Minimizes Ackermann geometry change at deep steering angles
-
Compatible with standard and 2.0mm offset knuckle bases
-
Precision-machined aluminum ensures crisp, reliable performance
-
Promotes consistent front-end roll even at steep drift angles
Tuning Benefits
-
Enables sustained high-angle drifts for wall-style courses
-
Maintains better corner exit momentum by reducing steering drag
-
Provides predictable behavior and tire contact through long slides
-
Ideal for drivers who prioritize maximum steering lock and fluid transitions
Product Specifications
-
Brand: Reve D
-
Product: D1-MK-PU Multi-select Front Knuckle Plate
-
Design: Type US
-
Compatibility: Requires D1-MK-B or D1-MK-B2 Knuckle Base
-
Note: Requires turnbuckle conversion; not for use with stock resin tie rods
Go wide and stay controlled. The Type US plate is your ticket to aggressive, angle-focused drifting, helping you maintain both style and momentum through the most demanding track sections.
