Estimated Arrival (ETA): End of March 2026
PO closes on 29th March 2026
~~~
REVED RT-006SN3 SPM Titanium Rod End Ball (Diameter 4.3 mm Short Neck Type SS 2 pieces)
Achieve linkage precision at the smallest scale with REVED's SPM Titanium Rod End Ball, now available in a short-neck SS size. This 4.3mm diameter ball stud features a 3.5mm neck length and 3mm screw length, the smallest configuration in the acclaimed Super Precision Machine Cut series. The lightweight titanium construction delivers smoother linkage movement and measurable gains in chassis performance where clearance is critical.
Key Features
-
SPM (Super Precision Machine Cut) titanium rod end ball in short-neck SS configuration.
-
4.3mm diameter with 3.5mm neck length and 3mm screw length.
-
Lightweight titanium construction for reduced unsprung mass.
-
High-precision machining ensures smoother linkage articulation.
-
Ideal for preventing interference with knuckle and rear hub carrier bearings.
-
Smallest size in the SPM titanium rod end ball series.
-
Set includes two pieces for paired installation.
-
One of eight available configurations for application-specific selection.
Why Choose This
Competition drivers recognize that linkage friction compromises throttle response and steering feel. This short-neck SS ball stud eliminates interference issues where standard lengths contact knuckle bearings, delivering the smooth articulation titanium precision affords. REVED's Super Precision Machine Cut process ensures each ball meets exacting tolerances, translating to consistent geometry under load. The compact 3.5mm neck fits tight chassis layouts without sacrificing the durability titanium provides. For builders demanding clearance without compromise, this is the solution.
Product Information
-
Manufacturer: REVED
-
Product Number: RT-006SN3
-
Product Type: SPM Titanium Rod End Ball
-
Configuration: Short Neck Type SS
-
Diameter: 4.3mm
-
Neck Length: 3.5mm
-
Screw Length: 3mm
-
Quantity: 2 pieces per set
-
Material: Machined titanium
-
Series: SPM (Super Precision Machine Cut)
-
Application: RC chassis linkage systems requiring minimal clearance
Eliminate linkage interference with the smallest titanium ball stud in the SPM series. The short-neck SS configuration delivers precision where standard components cannot fit. Order your REVED rod end set today and experience the difference that clearance-matched hardware provides.
Restocked SPM Ball Stud Lineup
REVED RT-006LNA SPM titanium ball stud (Long neck type/2 pieces)
Transform your YD-2's geometry with REVED's SPM titanium ball studs—precision engineering meets competitive advantage. The Φ4.3mm long neck eliminates spacer bulk on Ackermann setups, freeing up adjustment range without compromise. Rigid titanium construction expands ball cup motion for sharper cornering response. Every stud is machine-cut to exacting tolerances, delivering the buttery-smooth feel that separates podium finishes from the field. Shed unnecessary weight while gaining handling precision. The flawless finish elevates your machine's appearance to match its performance. Two pieces included. Review dimensions carefully before purchase.
REVED RT-006LA SPM Titanium Ball Stud (L size / 2 pieces)
Experience the ultimate upgrade in precision handling. These SPM titanium ball studs combine exceptional lightweight construction with uncompromising rigidity, engineered through advanced machine-cut processing. The Φ4.3mm design features ultra-smooth high-precision ball joints that dramatically enhance responsiveness and control on YD-2 series platforms. Every gram saved translates to measurable performance gains—faster acceleration, sharper cornering, superior agility. Meticulously finished to showcase-quality standards, these studs are as beautiful as they are functional. Unlock your machine's true potential. Set of 2. Verify dimensions before purchase for seamless compatibility.
REVED RT-006MA SPM Titanium Ball Stud (M size / 2 pieces)
Precision-engineered SPM titanium ball studs designed for YD-2 series and compatible platforms. These M-size components (Φ4.3mm) combine lightweight construction with exceptional rigidity, delivering smoother joint movement and enhanced performance. High-precision ball processing ensures fluid articulation while reducing overall weight for improved handling dynamics. The refined titanium finish elevates your build's aesthetic appeal. Each set includes two pieces. Verify dimensions against the provided specifications before purchase to ensure compatibility with your chassis.
REVED RT-006SA SPM Titanium Ball Stud (S size / 2 pieces)
Unlock competitive advantage with these SPM titanium ball studs, purpose-built for YD-2 series and compatible chassis. Precision machine-cut from premium titanium to Φ4.3mm specifications, these studs deliver the perfect balance of minimal weight and maximum rigidity. High-precision ball processing creates frictionless joint movement, enabling noticeably sharper steering response and improved handling dynamics. The lightweight construction directly enhances acceleration and cornering performance—exactly what winning builds demand. Exquisite polished finish reflects your commitment to engineering excellence and aesthetic refinement. Two premium studs included. Verify dimensional compatibility with your specific chassis before purchase to ensure seamless fitment and peak performance.
REVED RT-006SSA SPM Titanium Ball Stud (S size / 2 pieces)
Maximize performance with this SPM titanium ball stud—the ultimate upgrade for YD-2 series platforms. Super Precision Machine Cut technology ensures flawlessly smooth joint articulation, while premium titanium delivers unmatched strength-to-weight ratio. Experience dramatically improved handling responsiveness and control precision. The meticulous finish elevates your build's visual presence, making every detail worthy of inspection. Engineered for serious competitors and discerning collectors who refuse compromise. Unlock the performance advantage you've been seeking.
REVED RT-006SNA SPM Titanium Ball Stud (Short Neck Type / 2 pieces)
Dominate the track with this SPM titanium ball stud—the precision component serious builders choose. Engineered from lightweight, high-rigidity titanium and refined through advanced machine-cut processing, this Φ4.3mm short-neck design delivers uncompromising performance for YD-2 series and compatible platforms. High-precision ball geometry ensures frictionless articulation, translating to sharper handling and measurable exercise gains. The stunning titanium finish rewards every glance—a testament to your attention to detail. Two pieces per set. Cross-reference dimensional specifications with product images before purchase to confirm perfect compatibility.
REVED RT-006SNS SPM Titanium Rod End Ball, Short Neck, S (Φ4.3mm, Thread Length 4.5mm, 2 Pieces)
Precision-machined from titanium via REVE D's SPM process, this 4.3mm rod end ball joint transforms suspension geometry with zero compromise. The material's exceptional rigidity-to-weight ratio cuts unsprung mass while maintaining structural integrity under load. High-precision ball treatment eliminates friction and play, delivering instantaneous steering response and predictable handling on YD-2 series platforms. Finished to exacting tolerances, it's engineered for builders who demand measurable performance gains and flawless aesthetics.
