Please Note: This is a PRE-ORDER.
Your order will be shipped as soon as the pre-order item arrives in stock. If your order includes both in-stock and pre-order items, the entire order will be held and shipped together once the pre-order item becomes available.
About Stock Arrival:
Some pre-order items are limited in quantity or may have Reduced production by the manufacturer.
Because of this, we might not receive the full amount we ordeRed.
If this happens, we’ll ship items in the order pre-orders were placed. (first-come, first-served basis)
If your order isn’t fulfilled in the first shipment, it will automatically move to the next batch.
Important Notes:
for some limited items or items with no restock plans, we may have to cancel your order.
Even if you pre-order early, we can’t guarantee your item will ship in the first batch.
About Release Dates:
Release dates or periods (if announced by the manufacturer) are shown on the product page.
However, release dates may be delayed due to the manufacturer’s circumstances.
Please treat release dates as estimates only.
Estimated Arrival (ETA): MID JUNE 2026
PO CLOSES on 8th JUNE 2026
~~~
(PO JUN 2026) SHIBATA R31S132 GRK Racing Body Mount Plate
Strengthen your RC drift car's body mounting with Hayato Yoshiba's compact carbon fiber plate. This 2mm pure carbon component reduces crash-induced distortion while keeping weight minimal, featuring elongated adjustment slots from 61mm to 97mm for flexible damper positioning.
Key Features
-
Designed by Hayato Yoshiba (new shape body mount plate)
-
Compact design: 99mm total length
-
Material: 2mm thick pure carbon fiber
-
Reduces distortion of mounting area from crash impacts
-
Lightweight construction (minimal weight increase)
-
Elongated holes in magnet mounting area
-
Adjustable distance range: 61mm to 97mm
-
Flexible adaptation to damper mounting positions based on setup changes
Why Choose This
Protect your body mount alignment after hard impacts with this pure carbon fiber plate. You get a compact 99mm design, wide 61-97mm adjustability, and Yoshiba's racing expertise. Perfect for competitive drifters seeking durable, lightweight mounting that adapts to various damper configurations.
Product Information
-
Product: R31S132 GRK Racing Body Mount Plate
-
Manufacturer: SHIBATA
-
Designer: Hayato Yoshiba
-
Material: 2mm thick pure carbon fiber
-
Length: 99mm
-
Adjustable width range: 61mm to 97mm (via elongated magnet mounting holes)
-
Purpose: Body mount plate for RC drift cars (compatible with R31S062 lightweight magnet body mount)
-
Features: Crash distortion reduction, weight optimization, damper position flexibility
-
Type: RC car upgrade part
-
Does not include batteries, paint, fuel, or tools
This SHIBATA GRK Racing Body Mount Plate brings Yoshiba's engineering to your drift chassis. With 2mm pure carbon construction, 99mm compact length, and 61-97mm adjustability, this lightweight plate reduces crash damage while adapting to your evolving damper settings.
SHIBATA Carbon Battery Holder Set
Restore your GRK chassis with these precision carbon fiber battery holder replacement parts. Designed for separate-type battery systems, these plates match three popular chassis patterns and serve as ideal repair components for lost or damaged holders.
Key Features
-
Carbon fiber replacement parts for separate-type battery holders
-
Compatible with carbon main chassis
-
GRK carbon holder plate uses common shape compatible with three patterns:
-
(R31S060) GS2EVO Competition Conversion Chassis
-
(R31S119) EVO-R Conversion Chassis Set
-
(GRK5R) GRK5-R Standard Chassis
-
-
Same shape as battery holder plate used in GRK-R motor mount unit (GRK5RCV / GRKRCV)
-
Can be used as repair part for (R31S035) Separate Battery Holder
Why Choose This
Replace lost or damaged battery holders with authentic carbon fiber components. You get versatile compatibility across GS2EVO, EVO-R, and GRK5-R chassis, plus direct fitment for GRK-R motor mount units. Perfect for GRK owners needing reliable repair or spare parts.
Product Information
-
Product: R31S133 GRK Separate Battery Holder Plate & R31S134 GRK Carbon Battery Holder
-
Manufacturer: SHIBATA
-
Material: Carbon fiber
-
Type: Separate-type battery holder replacement/repair parts
-
Compatible with: Carbon main chassis
-
Cross-compatible shapes: GS2EVO Competition Conversion Chassis, EVO-R Conversion Chassis Set, GRK5-R Standard Chassis
-
Same shape as: GRK-R motor mount unit battery holder plate (GRK5RCV/GRKRCV)
-
Repair compatibility: (R31S035) Separate Battery Holder
-
Uses: Replacement, repair, loss recovery
-
Does not include batteries, paint, fuel, or tools
This SHIBATA carbon battery holder set keeps your GRK chassis running after part loss or damage. With compatibility across GS2EVO, EVO-R, and GRK5-R chassis, plus direct replacement for GRK-R motor mount units, these carbon plates deliver reliable repair solutions for separate battery systems.
(PO JUN 2026) SHIBATA R31S133 GRK Separate Battery Holder Plate
(PO JUN 2026) SHIBATA R31S134 GRK Carbon Battery Holder
GRK RACING Aluminum Cooling Fan
Chill your GRK electronics with this newly shaped aluminum cooling fan featuring the GRK RACING logo. Available in black, purple, red, and blue, including the new blue shade matching GS2NOB model color for a coordinated look.
Key Features
-
Newly shaped aluminum cooling fan
-
Features new "GRK RACING" logo
-
Available colors: Black (DR-AC30ABK), Purple (DR-AC30APU), Red (DR-AC30ARD), Blue (DR-AC30ABL)
-
New blue color matches GS2NOB model color
-
Body size: 30mm (H) x 30mm (W) x 10mm (D)
-
Mounting hole dimensions: approx. 24mm x 24mm
-
Cable length: approx. 180mm (BEC type)
-
Includes: Fan body x1, double-sided tape for chassis fixing x1, M2.6 x 5mm cap screws x4
Why Choose This
Keep your electronics cool with a fan that matches your chassis color scheme. You get the newly added blue for GS2NOB builds, plus red and purple by popular demand. Perfect for GRK racers wanting efficient cooling with branded style and coordinated aesthetics.
Product Information
-
Product: GRK RACING Aluminum Cooling Fan
-
Manufacturer: SHIBATA
-
Available models: DR-AC30ABK (Black), DR-AC30APU (Purple), DR-AC30ARD (Red), DR-AC30ABL (Blue)
-
Material: Aluminum
-
Fan size: 30mm x 30mm x 10mm
-
Mounting holes: approx. 24mm x 24mm
-
Cable: BEC type, approx. 180mm length
-
Includes: Fan body, double-sided tape for chassis mounting, M2.6 x 5mm cap screws x4
-
Type: RC car cooling fan / electronics cooling
-
Does not include batteries, paint, fuel, or tools
This SHIBATA aluminum cooling fan delivers GRK-branded thermal management in four color options. With 30mm compact size, 180mm BEC cable, and the new blue matching GS2NOB, this fan keeps your electronics cool while complementing your chassis color scheme.
(PO JUN 2026) SHIBATA DR-AC30ABK GRK RACING Aluminum Cooling Fan (Black)
(PO JUN 2026) SHIBATA DR-AC30APU GRK RACING Aluminum Cooling Fan (Purple)
(PO JUN 2026) SHIBATA DR-AC30ARD GRK RACING Aluminum Cooling Fan (Red)
(PO JUN 2026) SHIBATA DR-AC30ABL GRK RACING Aluminum Cooling Fan (Blue)
