Please Note: This is a PRE-ORDER.
Your order will be shipped as soon as the pre-order item arrives in stock. If your order includes both in-stock and pre-order items, the entire order will be held and shipped together once the pre-order item becomes available.
About Stock Arrival:
Some pre-order items are limited in quantity or may have Reduced production by the manufacturer.
Because of this, we might not receive the full amount we ordeRed.
If this happens, we’ll ship items in the order pre-orders were placed. (first-come, first-served basis)
If your order isn’t fulfilled in the first shipment, it will automatically move to the next batch.
Important Notes:
for some limited items or items with no restock plans, we may have to cancel your order.
Even if you pre-order early, we can’t guarantee your item will ship in the first batch.
About Release Dates:
Release dates or periods (if announced by the manufacturer) are shown on the product page.
However, release dates may be delayed due to the manufacturer’s circumstances.
Please treat release dates as estimates only.
Estimated Arrival (ETA): End of SEP 2026
PO closes on 24th SEP 2026
~~~
Graphite Upper Deck
Fortify your Rookie Speed chassis with Yokomo's RS-003FG and RS-003RG Graphite Upper Decks, a front-and-rear pair engineered to sharpen pitching rigidity while dropping weight low. These stiff carbon plates transform steering feedback, delivering razor-quick response and rock-solid stability at top speed. Sold separately for tailored tuning, they mount directly to the RSR-020TS and optionally the RSR-020. Whether chasing lap records or refining your setup, these decks reward every input with newfound composure.
(PO SEP 2026) Yokomo RS-003FG Graphite Upper Deck (Front)
(PO SEP 2026) Yokomo RS-003RG Graphite Upper Deck (Rear)
~~~
(PO SEP 2026) Yokomo RS-202A Aluminum Bell Crank (LR) / Center Link
Sharpen your steering precision with Yokomo's RS-202A Aluminum Bell Crank and Center Link set, a machined alloy upgrade that stiffens your chassis's directional control. While tie rod geometry matches the standard layout, the aluminum construction eliminates flex, translating every steering input into immediate response. This delivers notably composed handling when transitioning from straightaways into technical infield sections. Designed for the RSR-020TS and optionally compatible with the RSR-020, it rewards drivers chasing consistent, predictable cornering.
~~~
(PO SEP 2026) Yokomo RS-CFM Aluminum Cooling Fan Mount
Safeguard your motor's performance with Yokomo's RS-CFM Aluminum Cooling Fan Mount, a machined alloy bracket engineered to keep temperatures in check during demanding runs. Designed to accept 30mm cooling fans, it bolts securely to your chassis for efficient, vibration-free airflow exactly where you need it. Compatible with the RSR-020 and RSR-020TS, this mount delivers reliable thermal management that protects your electronics and sustains peak power output lap after lap.
~~~
(PO SEP 2026) Yokomo RS-630A Aluminum Drive Pulley (20T)
Unlock smoother power delivery with Yokomo's RS-630A Aluminum Drive Pulley, a precision-machined 20-tooth center pulley that minimizes rotational friction. Its elevated machining accuracy curbs drive loss, translating directly into brisker acceleration and elevated top speed. The belt contact surface receives a hard anodized coating for remarkable wear resistance, ensuring lasting performance. Designed for the RSR-020TS and optionally compatible with the RSR-020, this pulley rewards every throttle input with efficient, dependable transfer of power.
~~~
(PO SEP 2026) Yokomo Z2-415RDCG Graphite Molded Rear Hub Carrier for SO3.0
Tame your SO3.0's rear end with Yokomo's Z2-415RDCG Graphite Molded Rear Hub Carrier, a high-hardness, graphite-reinforced resin component that stiffens the back of your buggy under cornering loads. This upgrade resists the flex that saps traction and unsettles your line, delivering planted stability through sweeping turns and rough sections. Built to withstand punishing off-road abuse, it sharpens rear-end composure so you can push harder, corner faster, and finish stronger.
~~~
(PO SEP 2026) Yokomo S4-415RG Graphite Molded Rear Hub Carrier for MO3.0
Stabilize your MO3.0's rear geometry with Yokomo's S4-415RG Graphite Molded Rear Hub Carrier, a high-hardness, graphite-reinforced resin piece that keeps the back end planted under cornering stress. This upgrade curbs the flex that robs traction and blurs your racing line, granting composed stability through fast sweepers and uneven terrain. Engineered to shrug off rough-track punishment, it delivers the rear-end confidence you need to brake later, corner harder, and chase quicker lap times.
~~~
Racing Performer Quick Lock Connector
Lock in flawless electrical connections with Yokomo's Racing Performer Quick Lock Connectors, available in Φ4mm and Φ5mm sizes. Each features an aluminum screw threaded into the bullet plug, expanding the split end to eliminate accidental disconnection during hard runs. Color-coded terminals for positive and negative safeguard against reverse polarity mishaps. Whether you're bashing or chasing podiums, these precision connectors deliver the secure, worry-free power delivery that serious electronics demand.
(PO SEP 2026) Yokomo RP-124-4 Racing Performer Quick Lock Connector Φ4mm
(PO SEP 2026) Yokomo RP-124-5 Racing Performer Quick Lock Connector Φ5mm
~~~
(PO SEP 2026) Yokomo RP-123 Racing Performer 5-4mm Sleeves (2 pieces)
Bridge mismatched connectors effortlessly with Yokomo's Racing Performer 5-4mm Sleeves, a two-piece adapter set that lets you pair 5mm plug batteries with 4mm plug systems. These compact sleeves solve compatibility headaches, keeping your pit bag versatile across different power setups. Note that the connector top remains exposed once installed, so exercise caution to prevent short circuits. Ideal for racers juggling mixed battery and ESC configurations without rewiring, they deliver simple, practical adaptability.
~~~
(PO SEP 2026) Yokomo ZC-A23BC Yokomo Factory Cap (Curved Type)
Sport the Yokomo Racing Factory logo with the ZC-A23BC Factory Cap, a curved-brim design crafted entirely from premium fabric. Embroidered detailing and sturdy stitching mirror the build quality of renowned apparel brands, ensuring this cap holds up through countless race weekends and pit sessions. Its classic curved silhouette delivers comfortable shade and timeless style, making it the perfect finishing touch for dedicated Yokomo fans who want to represent their favorite brand trackside.
