Sanwa 101A32437A M17 (RX-493i/PGS-XRII x2 / Hyper Switch Harness)

Sanwa M17 Servo Combo

Receiver: RX-493i x1

Servo: PGS-XRII x2

Include: Sanwa 107A20471A Hyper Switch Harness

 

Sanwa M17 Feature:

■ Uses TFT color liquid crystal (480 x 320) with excellent visibility
■ Intuitive operation is realized by the touch pad equipment
■ The adoption of a detachable throttle unit makes it easy for the user to replace the throttle spring.
■ Optimized and coaxial steering/throttle position without installing an offset bracket
By reviewing the structure of the steering unit, the feeling of rigidity during operation has been further improved.
■Steering swing can be adjusted by replacing steering unit parts.
■We equip the transmitter body with charge port. Li-Po battery built-in charging circuit LED makes it possible to check the charging status
"A charging cable is not included." Please prepare a commercially available micro USB cable (B Type) separately.
■ Firmware updates, model data, and telemetry log data are supported by supporting micro SDHC cards.
Management is possible
* Compatible micro SD cards are micro SDHC card CLASS 2 to 6.
　Class 10 may not be used depending on the product.
We recommend Sanwa genuine micro SDHC card 4GB.
Equipped with a multi-setting gear function, it is possible to connect a servo to the M17 and set the PGS servo.
■ Fully compatible with SSL CODE10 and CODE5, allowing settings such as PGS servos and SUPER VORTEX Gen2 PRO to be set from the transmitter
　Can be changed in real time
■Equipped with a tilt carrier handle that does not break the structural line of the M17 body. By storing it in the upper part of the main unit when not in use
　Contributing to compactness
■ Corresponds to southpaw change by rearranging the steering unit
■Strap hook at a point closer to the ideal position for users using propo straps
can be worn
Inheriting the fully adjustable trigger mechanism, it corresponds to the detailed taste of the user
■Includes a large steering wheel that enables more precise operation
■Grip pads, brake triggers, trigger angle spacers, various springs, etc. Bundled options
　Fully customized by parts
■ RX-491 with a plug-in BIND that is more compact than the current receiver, waterproof, and a short antenna.
■Equipped with a function to read out lap times and telemetry data using voice data. Equipped with earphone jack
　Even in environments where it is difficult to hear
■ Quick setup wizard makes it easy to set up model data and various settings

[Other Special Features]
● Full-dot color LCD (480×320) ● Left/right driving position switching function ● Touch pad
● Built-in antenna ● Detachable fully adjustable throttle unit ● Feeling
● ST, TH tension adjust ● Safety link ● Racing mode ● Setup wizard
● Dual rate ● End point adjust ● Anti-lock brake ● Servo speed ● Offset
● Trim/Sub Trim ● Servo Reverse ● Curve ● Fail Safe ● Timer ● Lap ● CODE AUX
● Model memory ● Model name ● Model (select/copy/clear/sort) ● Direct model select
● RF MODE setting (FH5U, FH5, FH4, FH3) ● Response mode setting (SXR/SUR/SSR/SHR/NOR) ● Bind
●Log (REC/RPM/VOLT/TLM1/TLM2/ST point/TH point/RX mode/reading function)
● Servo monitor ● Key assignment ● Vibrator ● AUX type ● Trim type ● Throttle type
● Calibration ● Custom menu ● Mechanical steering angle adjustment, etc...
● Compatible receivers: * Telemetry compatible: RX-493i, RX-492i, RX-493, RX-492, RX-491, RX-482, RX-472, RX-47T, RX-462, RX-461
*Telemetry not supported: RX-481, RX-471 Dual-ID, RX-471W, RX‐471, RX‐451R, RX‐451, RX‐381, RX-380

[Include]
● Grip pad (large/small) ● Large steering wheel ● Strap hook
● Steering slant parts (for right/left) ● Trigger angle spacer ● Brake trigger (+1/+2)
● Springs for ST and TH (hard, medium, soft, super soft) ● Dial cover for southpaw