Description
■ High-resolution liquid crystal display
Adopting a finer dot size equivalent to MT-44, graph
A gray scale display is adopted even though it is a monochrome liquid crystal display.
By doing so, more information can be displayed.
(3 data can be displayed on the graph)
■ Position optimization
Steering / without using offset bracket
Optimization of throttle position.
■ Supports micro SD card
* Supported micro SD cards are
It becomes micro SDHC card CLASS 2-6.
Some CLASS 10 products cannot be used.
Sanwa genuine micro SDHC card 4GB is recommended.
■ Industry's first low voltage
With 3 cells of AAA battery, it is only compact
Also realized weight reduction.
■ USB charging support
With the optional Li-Po 1-cell battery (LP1-2500)
Achieves further weight reduction and supports USB charging.
MT-5 <RX-493i / PC primary component> * SSL compatible (CODE5 / CODE10 compatible)
■ Applications / RC general ■ Receiver / RX-493i (FH5) x 2 * Telemetry compatible
[new function]
● Realizes ultra response by supporting FH5 / SUR
● Industry's first indicator function equipment
〇 About the indicator function
MT-5 is a combination with RX-493i, which is the radio wave transmitted from the transmitter to the receiver.
The reception status can be confirmed on the transmitter side by the reception strength and reception rate.
By checking the reception status, it is possible to check the device failure and how to install the receiver.
I can do it.
-Reception strength (RSS): Displays the strength of the radio wave received by the receiver from the transmitter.
-Reception rate (PDR): The reception rate is high when there are many simultaneous running units or when other 2.4GHz devices are mixed.
It may go down.
* The indicator function is a function to check the reception status by applying telemetry.
* RX-493i has basic response performance, etc., except that it has an indicator function.
Performance is the same as RX-493.
[Other functions]
● Equipped with movable carrying handle ● Quick setup function ● Safety link
● Racing mode ● Custom menu ● Supports micro SD card / micro SDHC card
● Telemetry switch function ● Clock function ● Environmental temperature display function ● LOG data CSV output
● Supports CODE10 (supports names) ● Simultaneous display of 3 telemetry data
● Multilingual display support (Kanji support) ● AAA battery 3-cell specification ● Li-Po 1-cell battery support (USB charging support)
● Large full-dot LCD monitor ● White LED backlight ● Fully adjustable trigger
● Telemetry function ● Built-in antenna ● Menu selector (multi-selector operation)
● ST, TH tension adjuster ● Dual rate ● Endpoint adjust
● Anti-lock braking function ● Servo speed ● Offset ● Trim / sub trim
● Servo reverse ● Curve (exponential / adjustable rate control)
● AUX1 (Select 3ch operation type. Same function as MT-44)
● AUX2 (Select 4ch operation type. Same function as MT-44)
● Fail-safe function (radio wave / battery) ● Timer (lap / interval / down)
● Wrap ● Logger ● 20 model memory (250 model when using SD card)
● Model name (12 characters) ● Model (select / clear / copy) ● Direct model select
● Trim type (center / parallel) ● Throttle type (70:30 / 50:50)
● RF MODE setting (FH5) ● Response mode setting (NOR / SHR / SSR / SUR) * SSR and SUR must be used in combination with compatible devices.
● Key assignment (SW / TRIM / DIAL / LEVER)
● AUX TYPE setting
・ CODE AUX (with name change function)
・ Step AUX (steps 1 to 100)
・ Point AUX (2 to 6 points)
・ 4WS mixing (FRONT / REAR / NORMAL (in-phase) / REVERSE (opposite phase))
・ MOA mixing (front wheel drive / four wheel drive / rear wheel drive) * Variable drive ratio
・ AUX mixing (ST mixing, TH mixing)
● Buzzer (scale / volume change) ● Transmitter battery alarm ● LCD contrast
● Volume adjustment ● Mechanical steering angle adjustment ● Small grip pad included
● Compatible receivers: RX-493i, RX-492, RX-493, RX-491
* The indicator function cannot be used with the combination of MT-5 and RX-493, RX-492, RX-491.