Description
-BMC tag holder holder white. (With protective cap)
-Improved hold and operability
-Since BMC tage is handmade, there is an error in the size of the handle.
-If the metal cap is rattled even after tightening the metal cap, wrap the cellophane tape around the chisel and adjust the thickness.
-If it is tight, cut off the protrusion on the tip or cut the inside.
-The maximum size of the cane that can be installed is width: approx. 5.0 mm, thickness: approx. 2.6 mm.
-If you remove the metal cap and reinstall it, be sure to keep it vertical and screw it.
-If you feel tight, do not forcibly tighten.
-If you keep tightening it at an angle, the holder thread will be crushed and become unusable.