Kyosho 30052VR DUCATI DESMOSEDICI GP11 No.46 Readyset - BanzaiHobby
Roll over image to zoom in Click on image to zoom
Kyosho 30052VR DUCATI DESMOSEDICI GP11 No.46 Readyset - BanzaiHobby

Kyosho 30052VR DUCATI DESMOSEDICI GP11 No.46 Readyset

KyoshoKyosho 30052VR　|　
Price:
¥17,622 ¥19,580

Description

Kyosho 30052VR

30052VR DUCATI DESMOSEDICI GP11 No.46 Readyset


E-gyro with precision setting optimizes driving stability across the entire speed range!
Enjoy running direct lines and full banking turns! Micro MOTO Racer is ready to excite!

Kyosho captures the fascinating world of the motorbike racing in the palm of your hand with the stunning realism of the new MOTO Racer. MINI-Z quality and engineering guarantee performance that will leave onlookers speechless as the driver appears to control the bike with stability through straight lines and deep banking turns. Incorporating the same theoretical driving control as a real motorcycle, the steering control logic and the driving control system allows the model to be maneuvered freely like no R/C racing bike ever before. Amazing two-wheeled vehicle stability has been achieved with the advanced E-gyro System featuring an in-wheel rotator from a brushless motor built into the rear wheel. Powerful motor drive delivers efficient gyro effect to realize driving stability. Regardless of speed, the E-gyro allows stable straight line running and cornering. In addition, separate RPM settings for low speed and high speed can be made on the E-gyro to favor greater stability or greater maneuverability. For example, the E-gyro's RPM can be set at high RPM for greater stability for driving at slow speeds, or the RPM can be reduced for easier banking turns at higher speeds. The E-gyro can be set to suit your skill level or however you prefer. This combines with the suspension systems on front and rear to deliver super smooth handling. Also, with the newly designed FHSS 2.4GHz R/C system, up to 40 models can be raced at the same time. The model is fully pre-assembled and the Readyset includes Li-Po battery and charger. Simply add your own batteries to the transmitter and charge the included Li-Po battery to experience the thrill of driving your own racing motorbike.

Innovative E-gyro built into the rear wheel incorporates a powerful brushless motor. Promises amazing stability.(Designed by AR Racing)

 __

Individual RPM settings on the E-gyro can be made for low and high-speed throttle input. Provides precision settings for optimal stability and maneuverability.

 __

Features adjustment of chassis height and stepless adjustment of front fork caster angle. Change settings to produce your preferred driving characteristics.

Includes battery charger that connects to the transmitter via USB. Can also charge two Li-Po batteries simultaneously when connected to a PC.

 __

Inverted (upside down) front forks (like full-size motorbikes) combines with a monoshock swingarm rear suspension to realize reliable grip.

 __

Includes fingertip size large capacity 3.7V-120mAh Li-Po battery. Allows run times of approximately 10 minutes (may vary depending on conditions).

Detailed scale finish magnifies the actual 1/18 scale size.

 __

3-channel 2.4GHz R/C system with frequency hopping (FHSS) allows up to 40 models to be run together at the same time. Includes specially designed KT-19 transmitter. *ASF 2.4GHz transmitter for MINI-Z cannot be used.

 __

  • Fully factory assembled Readyset.
  • Two-wheel vehicle stability combines with realistic finish in 1/18 scale.
  • E-gyro RPM responds to throttle input and realizes stable performance.
  • Separate E-gyro RPM settings can be made for low and high throttle input.
  • Equipped with suspension on front and rear.
  • Full bearing specifications include 10 ball bearings.
  • Chassis height adjustment.
  • Stepless adjustment of caster angle.

__Set Contents __/p>

  • Factory assembled chassis with R/C unit installed (pairing with transmitter is complete)
  • Pre-painted factory assembled plastic body finished with markings
  • KT-19 transmitter
  • USB powered charger
  • 3.7V-120mA Li-Po battery
  • Tweezers
  • Display rear stand
  • Hexagonal wrench

__

__Required for Operation __/p>

  • AAA size alkaline batteries x 4 for transmitter
Chassis Technical Data
Length
 118mm
Width
 41mm
Height
 73mm
Wheelbase
 85mm (varies according to caster angle adjustment)
Tire(F/R)
 __32.7?7.1mm___35.2?11.3mm
Weight
 85g (approx.)
Motor
 Coreless drive motor/KV7000 Brushless E-gyro motor
Battery
 3.7V-120mA Li-Po (included)



You may also like

Recently viewed