Futaba 036972 T10J w/ S3008SBx2 for Airplane (00008672-3 )

This set comes with x2 S3008SB Receivers

10-channel mid-range radio with telemetry function.
The 10J uses the 2.4GHz two-way communication system, T-FHSS AIR, and has the functions of airplanes/helicopters, as well as gliders and multicopter, making it a high-performance radio that allows you to pursue infinite possibilities.

●Telemetry function: Equipped with the two-way communication system T-FHSS Air. By combining the voltage of the receiver battery installed in the aircraft and various optional telemetry sensors, the transmitter can display various information about the aircraft, such as the power battery voltage, altitude, speed, and temperature. In addition, you can use earphones to monitor the numbers by voice and issue warnings such as voltage drops with a vibrator.

 

●Backlit LCD: Adopts a large graphic LCD panel with a backlight. The graph display of the setting curve and the bar graph display of servo operation are now easier to see. In addition, the display language supports 7 languages, and Japanese is displayed in katakana.

●Built-in antenna: A diversity antenna is built into the case, improving the simple appearance and ease of use.

●Intuitive setting with jog keys and buttons

●Volume channel and LED indicator: The VR knob can be assigned to an auxiliary channel that requires linear adjustment. In addition, two LEDs inform you of various transmitter conditions.

●Battery specifications: Can be used with four AA batteries. (Rechargeable batteries are also available separately)

Functions and specifications

Common functions (airplane/glider/helicopter/multicopter)

●Can control up to 10 channels

●30 model memories, model copy

●Model menu (airplane/helicopter/glider/multicopter)

●Radio wave format (2.4GHz): Supports T-FHSS Air and S-FHSS. Set on the model selection screen.

Click here for a list of receivers compatible with each format.

●Throttle (motor) curve (5 points)

●Failsafe: Can be set for all channels.

●Battery failsafe: Can change the detection voltage according to the type of battery used. (T-FHSS Air mode only)

●Program mixing: Can customize 6 independent mixing systems. (Normal type x 4 systems, curve (5 points) type x 2 systems)

●Timer (2 systems): The timer can be set for each model, so there is no need to set it every time you change models.

●Stick alarm: Can sound an alarm at a specified position of the throttle stick.

●Trainer: A trainer function that allows you to select the operation mode, such as limiting the operation channel according to the level of the person practicing or providing support only for counter steering.

●Trainer connector, earphone jack (compatible with 3.5mm stereo mini plug), S.IF connector: The S.IF connector is used to set the S.BUS servo and telemetry sensor.

 

●Display language (Japanese Katakana/English/5 other languages, partially supported)

●Model name/user name (up to 10 characters)

●Alarm (timer)/Vibrator (battery, MIX, telemetry)

●D/R (dual rate): Aileron, elevator, rudder

●EXP (exponential): Aileron, elevator, throttle (not in helicopter mode), rudder

●EPA (ATV), digital trim, sub trim (all channels), reverse

●Throttle ATL

●Stick calibration

●Servo display/servo test

●S.BUS servo programming: Allows you to set parameters for S.BUS/S.BUS2 servos.

●Model transformer (data transfer function)

[For airplanes only]

●Flaperon (with differential function)

●Flap trim

●Aileron differential

●Aileron → Rudder mixing

●Elevator → Flap mixing

●Flap → Elevator mixing

●Air brake

●V-tail

●Elevator

●Elevator (ch2 and ch8)

●Snap roll

●Gyro sensitivity switching function

●Throttle curve (up to 5 points)

●Pitch curve (up to 5 points)

●Throttle delay

●Idle down

●THR (throttle) → Needle mixing

●Gyro sense

●Throttle cut/Motor cut

●Flap trim