Fujimi Honda CT125 (Hunter Cub/Non Color)

――A white molding color that takes into consideration the color paste for painters, and specifications that come with new decals!

--The product is a kit format that requires assembly. It is 1/12 scale.
--Painting required: Parts are divided according to the actual color tone, and masking is minimal.
--No need to bond: The design specifications that fit the parts together make it easy to assemble.

--In the 2010s, the first Cross Cub appeared, and in 2017, the current Super Cub debuted.
――And the [CT125 Hunter Cub], which is reminiscent of the former CT110, appeared in 2020.
――The body is slightly larger than the C125, and it is finished as a leisure bike that has a powerful run at medium and low speeds, and has characteristic shapes such as a muffler like the CT110 and a square turn signal.
――The actual car is available in three colors with the addition of red, beige and green. (As of the end of 2021)

--The product is based on the CT125 Hunter Cub, which went on sale in 2021.
--It is a Japanese domestic specification equipped with a tandem step and a muffler cover.
――The size unique to 1/12 scale accurately reproduces detailed modeling.

――The body is a white molding color in consideration of the color development at the time of painting.
――The parts to be painted in silver are mainly black molding color.
--The molding color consists of four types: white, black, clear, and clear red.

-The engine body is a specification that the black part and the silver part are assembled in a block shape with a molding color that is made into separate parts.
-The [HONDA] sculptures on the left and right are reproduced with delicate mold engraving.
――The characteristic intake passage on the left rear is reproduced by dividing the parts so that the matte black and the body color can be easily separated.
--The side stand and center stand are movable.

-The switches around the handle are accurately three-dimensionalized, and the markings are reproduced with the attached decals.
――The meter has a realistic style with transparent parts covering the cover surface.
-The wing mark in the center of the steering wheel is expressed with decals, and even the detailed parts such as the master cylinder on the right hand side are reproduced.

――The sheet has a 3-piece structure according to the fabric seams.
--The seat can be moved (opened and closed). The area around the fuel filler port on the inside is three-dimensional, and the tank cap is a separate part that can be easily painted.

--The tandem step can be stored or expanded, and can be changed by replacing the parts.
――The characteristic rear carrier that stands out is a one-piece part that uses a slide mold.

-Wheels and spokes are integrally molded, making it as thin and realistic as the Super Cub of the same series.
--The wheels built into the car body can rotate.

――A newly manufactured decal for this product is attached, and unlike the seal, it is a specification for painting where the thickness does not matter.

――The size at the time of completion is about [total length 165 x total width 69 x total height 109 mm].
--126 parts assembled

[Attachments]
・ Runner X16
・ Rubber material tire X2
・ Assembly manual X1 ・ Decal X1