Fujimi Honda Super Cub110 (Virgin Beige)

--The product is a kit format that requires assembly. It is 1/12 scale.
--No painting required: Each part is colored with a molding color, and the body has a glossy texture that cannot be obtained by painting.
--No need to bond: The design specifications that fit the parts together make it easy to assemble.

――The product is based on the current Super Cub C110, which was launched in 2018.
--You can select / manufacture two types of lamps: the initial type and the brake lamp that complies with the revision of the regulations in May 2020.
――The number of moving parts unique to 1/12 scale and detailed modeling are accurately reproduced.

――The body has a two-piece structure that fits left and right.
--The leg shield is integrally molded and designed to be easily press-fitted to the body.
-The front fender integrates parts while accurately reproducing the modeling with a slide mold.
――The side cover is made into a separate part from the body, and the complicated shape composed of curves and straight lines is accurately three-dimensionalized.
――The handle is shaped to be sandwiched between the bodies, and the left and right grip switches are also firmly modeled.
――The meter panel is represented by the attached sticker, and the panel cover is fitted with clear special parts for a realistic finish.
――The mirror has a very fine injection design for the stay in order to create the atmosphere of the actual vehicle as much as possible.
-Reproduced with the correct shape and parts for each brake lever, which is a different color from the steering wheel.
――For the headlights, the lenses are prepared with clear parts, and the internal shape is also expressed with delicate engraving.
――The engine has a three-dimensional representation of the external shape with a three-part configuration divided into left and right and front parts.
――The change pedal is a one-piece part that accurately reproduces the bar cross section and pedal shape.
――The muffler has a 3-piece structure that reproduces both the exhaust port and the conical shape.
-The hook inside the leg shield, which is also a feature of Super Cub, can be easily sealed or adhesive bonus parts can be selected.
――The stand is a separate part and is movable. It is also possible to park the bicycle.
――The side stand is movable as a separate part. It is possible to tilt the body and put it in a parked state.
――The seat has a two-piece structure divided in the same part as the color tone, and it is a movable type that can be flipped up.
-Reproduces the refueling port flat when the seat is open.
--The name decals on both sides of the fuel tank have metallic wheel seals.
――The rear carrier uses a slide mold and is an integrated part.
--Brake lamps can be selected from two types: a horizontally long type after the revision of the 2020 Law and a vertically long type from the time of release.
--The rear seats of the actual vehicle optional parts are recorded as bonus parts. You can choose to wear it.
――The hub in the center of the wheel is a one-piece part that reproduces the surrounding shape with a slide mold.
――The tires are made of rubber, which is specially used for this product.
-Accurately reproduce the difference in width between the front and back.
--The size at the time of completion is (approx.) Overall length 155 x overall width 58 x overall height 87 mm.
--111 assembled parts

[Attachments]
--Runner X18
--Rubber material tire X4
--Assembly manual X1
--Seal X1