Plamokojo PMKJ028 Pamokojo My Sumi Pen Hobby Tool
In order to create a three-dimensional plamo finish, the sumi holder is an indispensable process.
But it's hard to find the perfect color to match your plamo tint.
The My Smi Pen is an innovative pin-type sumi pen that allows you to insert your preferred color color into the pen inside to create a paint brush and allow you to fill it with a professional smear pen with the convenience of a marker pen.
The material is resistant to enamel solvents, so you can create a smiling enamel paint pen that is easy to wipe off and reapply.
You can also use it with poured glue.
PACKAGES
My Sumi Pen x 3
Dedicated measuring cup x 1
Product size: Approx. H 6.3 x W 0.6 inches (160 x 15 mm) (built-in mixing sphere) Φ 0.2 inches (5.5
Dedicated measuring cup size: Approx. H 1.0 x W 0.9 inches (26 x 23
Directions for Use:
1. Add paint to the underline of the cup
2. Add a thinner liquid to the top line of the cup, and mix
3. Open the inlet lid and pour the paint.
4. Tighten the lid tightly. The consistency of the paint varies depending on the type of paint. Please adjust the amount of paint and thinner liquid before using.
5. Turn the opening knob vertically. Maintain the paint until the brush tip penetrates.
6. Turn the opening knob diagonally. (Adjust the angle according to the amount of paint is produced); After that, apply a brush tip to the area you want to insert and pour the paint.
Make your own smiling pen in your favorite color.
The My Sumi Pen is a pen that allows you to fill the sumi in the color you want to make the finish your choice.
When using, first dilute the paint and solvent (ink) according to the scale of the dedicated measuring cup, and pour it from the back of the pen.
Turn the knob on the side of the main body to complete the ink color, then set it up.
Once you set the color once, you can insert approximately 2-3 kits of pluamo.
The product comes in 3 pieces in multiple colors for a wide range of uses.
The ink flow may differ depending on the color and temperature used. Based on the dilution of the dedicated measuring cup, add solvent as needed and adjust to a concentration that is easy to flow.
There is a risk of paint leakage from the inlet lid at the back of the pen. Please tighten tightly.
Authentic suming in capillary phenomenon.
Keep your brush tip on the plamo mold that you use to insert the smell, the ink flows out and the strainer begins.
Same as a smearing paint brushes, capillary phenomenon, the ink naturally flows into the channel of the panel line for an ideal finish.
The brush tip is ultra-fine and can be easily poured into narrow or narrow areas.
Depending on the ink type and dilution level, flow rate is different, so you can adjust the knob diagonally while using it.
Made with materials that resist water and lacquer solvents as well as enamel solvents, you can create a smiling pen with enamel paint that is easy to wipe off and reapply.
You can refill the color you have used once, but you cannot use different colors with the same pen.
Built-in mixing ball to compensate for mixing paint.
If stored for a period of time, the ingredients may be separated, so the main unit contains a metal agitating ball as standard.
Shake the pen body up and down to return the infused paint into an even mix.
Even if you forget to work or the second stir it can be used immediately by shaking the pen and stirring the knob, or when the ink runs out, you can refill the same color ink and reuse.
If the product is stored for a long time, the paint will stick to the body and cannot be stirred. Please use it regularly as possible.
When shaking the pen, please check that the knob and lid are contained before shaking. There is a risk of paint splashing out of the brush.
Easy to store and clean up.
Turn the knob on the side to remove ink leakage and save ink while reducing volatility.
The brush tips are made of highly resilient material that will not crack or pill even if the paint is stuck and can be easily restored to its original shape by simply removing the part cleaning solvent.
The tip will harden if stored for a long time, so it must be dissolved with solvent before use.
When storing, please put the brush tip down and stand up for storage. The remaining paint on the brush tip may drip and cause the handle to get dirty.
Please wipe off the remaining paint before tightening the cap.
Also compatible with poured adhesives.
This product can also be used as a glue pen.
By transferring the leftover glue to the MySmi Soup Pen with an eyedropper, you can use it up to the last drop, making the adhesive work smart
Poured adhesive is very low liquidity, so it may flow out of your brush. You need to tighten the knob on the side to reduce the flow rate.
This product is a hobby tool.
Does not include adhesives, paint, batteries, etc.) other than this product.
