PO Closed
~~~
Features
AD380, a discharger with a maximum power of 380W
Discharges batteries at a maximum of 40A or 380W and can measure up to 30V regardless of the type, size, number of cells, or type of battery.
2 WAY Discharge! The AD380 can be discharged in two ways.
[1] Single use ● Connect only the battery for easy discharge
[2] Use with charger ● Connect compatible charger X2 AC PLUS V1000 / X2 AC PLUS 800 for cycle charging and discharging!
4 discharge modes
Choose from 4 discharge modes according to your needs. Equipped with a discharge mode for industrial "electronic load" measuring instruments, which was not available for radio-controlled cars.
CC (Constant Current) Mode
CC mode is the same discharge mode as conventional RC dischargers. It measures battery capacity (mAh) by passing a constant current value (A). It is ideal for accurate capacity measurement and battery inspection.
CR (Constant Resistance) Mode
CR mode discharges at a constant resistance (Ω). In electrical factories, it is used to evaluate batteries and power supplies. It is a practical method to check the amount of energy stored.
Constant Power (CP) Mode
CP mode discharges at a constant power (W). In electrical factories, it is used to test power supplies and AC adapters.
Constant Voltage (CV) Mode
CV mode discharges connected devices until a constant voltage (V) is reached. In electrical factories, it is used to test chargers.
*Do not connect a battery as it is dangerous.
Display language supports Japanese (Kana)
Supports English/Japanese/Chinese/German/French/Spanish. You can easily switch between languages to operate.
Operation is also possible with a smartphone app
It has a built-in Bluetooth module, so you can operate it from your smartphone with the "Hitec LinkPower X JPN Ver" app.
Connect to a PC and analyze battery performance with software
You can use the computer software "Hitec Charge Master" by connecting the AD380 to the X2 AC PLUS V1000 or X2 AC PLUS 800.
Charge and discharge can be performed via a Windows/Mac OS computer. Various parameters such as charging time and capacity can be visually displayed, and charging current and voltage can also be displayed as curves.
Basic specifications
Operating voltage DC 3.0V-30.0V CC constant current 0.3-40.0A
Discharge voltage range When connected to an external power source 3.0V-30.0V
Main port only 5.9V-30.0V CR constant resistance 1-100Ω
Error tolerance range Low voltage less than 3.0V
High voltage 30.5V or higher CP constant power 1-380W
Discharge power Maximum 380W CV constant voltage Maximum output 180W
Note: Do not connect a battery in CV mode.
Note: Please set the maximum current available for the input current voltage.
Discharge current 0.3A to 40.0A
Connection terminal XT60 APP iOS/ Android
Size 159.69 x 121.6 x 110 mm Weight Approximately 1100g
