Dial in your FR-D7 front suspension instantly with this ball ends, spacers, and set screws pack based on Wrap-Up's recommended values. Achieve 195mm width, 8° camber, 8° caster, and mild toe-out without guesswork.
Key Features
-
Pre-configured front setup pack for FR-D7
-
Contains: Ball ends (L) x8, (M) x4
-
Spacers: 15mm, 12mm, 11mm, 9.5mm (x2 each)
-
Set screws: 30mm x2, 25mm x4, 20mm x2
-
Setup specifications: Overall width approx. 195mm, Camber 8°, Caster 8°, Toe angle weak toe-out
-
Based on Wrap-Up's recommended values
-
Ideal for quick setup (use with turnbuckles for personalized settings)
-
Compatibility: RDX kit standard knuckle, 5.5mm wheel hub, 6mm wheel offset
Why Choose This
Skip the trial-and-error setup with this pre-configured front rod pack. You get all the ball ends, spacers, and set screws for Wrap-Up's proven 195mm width, 8° camber, 8° caster, and mild toe-out. Perfect for racers wanting a consistent baseline to start tuning from.
Product Information
-
Product: 0862-FD FR-D7 Front Easy Setup Pack
-
Manufacturer: Wrap-Up Next
-
Compatibility: FR-D7 chassis (front rods)
-
Contents: Ball ends (L x8, M x4), spacers (15mm/12mm/11mm/9.5mm x2 each), set screws (30mm x2, 25mm x4, 20mm x2)
-
Setup spec: Width ~195mm, Camber 8°, Caster 8°, Toe weak toe-out
-
Knuckle compatibility: RDX kit standard knuckle, 5.5mm wheel hub, 6mm wheel offset
-
Use: Quick setup, pre-configured baseline
-
Does not include turnbuckles
This Wrap-Up Next FR-D7 Front Easy Setup Pack gets your chassis dialed in fast. With pre-selected ball ends, spacers, and set screws delivering 195mm width, 8° camber/caster, and mild toe-out, you get a proven baseline for consistent performance.
Note: This product is an RC car setup accessory. Turnbuckles not included.
