Description
| The 2020 trend ... it will make the machine lighter! Each part of the famous car YD-2 has been carbonized, but finally, even the front damper stay has been carbonized! Made of 4mm thick carbon! We only have 6 grams This part is a setting part, so I think it may not fit the machine due to the course layout and the size and shape of the corners. In that case ... Please readjust each part of the machine. Since the shape is matched to the normal, it is compatible with both aluminum and resin bulkheads. The steering method is compatible with both wiper type and roundly type. ※note The number of upper arm spacers will be changed. If the attached upper pin cannot be used, use a commercially available 2 mm thick spacer, etc., and pull out the damper stay body 2 mm forward before use. (Because the thickness of the stay on the caster is different) ※note Use the attached screws and washers to carefully work on the upper pin dropout prevention part. When changing the position of the upper pin, it is recommended to remove the stay body and replace it without removing this screw. Carefully use superglue when repairing holes |