Wrap-Up Next 0745-FD BT-01 FR-CONCEPT Drift Conversion Kit

Wrap-Up Next 0745-FD BT-01 FR-CONCEPT Drift Conversion Kit - Battery Holder NOT included

This is a drift conversion kit for FR layouts for the Tamiya BT-01 kit. FR chassis has been pursued by WRAP-UP NEXT since its founding.

The development was based on the FR-D series, and a traction machine that overturns the concept of FR and front motors has been completed.

The all-in-one front unit VX-DOCK ZERO is centered on a servo bulkhead located in the center, and integrates a direct steering mechanism, shock tower, and suspension.

We have achieved an overwhelming turning angle designed specifically for drifting and optimized the geometry. In addition, most of the parts are made of aluminum and carbon parts to achieve high precision and durability.

Two types are available: a specification with a newly designed carbon battery holder and a holderless specification that allows you to use the standard plastic battery holder of the kit.

*This conversion kit requires simple processing (cutting) of a part of the chassis, which takes about 5 minutes.

Conversion kit contents

■ Aluminum bulkhead (black)

■ Aluminum upper brace (black)

■ Carbon extension plate for high torque servo saver

■ Aluminum dual purpose arm (lower & upper) (black)

■ 2.0t carbon side deck

■ 2.5t carbon lower plate

■ 2.5t carbon upper plate

■ 4.0t carbon shock tower

Recommended parts required separately

Recommended parts have been carefully selected based on the balance of price, availability, and performance.

Made by ReveD

Resin front knuckle (left/right) for D1-415FM RDX 

Made by Tamiya

SP-1000 High torque servo saver (black) 

OP-1209 5×5mm fluoro-coated aluminum hexagonal ball joint (5 pieces)

42323 Short ball joint nut for TRF damper (8 pieces)

OP-1869 Open type 5mm reinforced adjuster (long, 8 pieces) 

OP-1183 M chassis reinforced freewheel axle set 

SP.1239 1050 bearing (4 pieces) 

*Other steering turnbuckles over 45mm (length depends on vehicle width)