Yokomo MDR-010LTS Master Drift MD1.0LTS

Introducing the MD1.0 LTS (Load Transfer Special), a high-end machine that resembles the movement of a real car, with a combination of a heavy load transfer and a solid suspension sink and extend!

The basic configuration follows the luxurious MD1.0, but the center of gravity setting provided by the high-mounted battery creates a traction roll, allowing you to enjoy behavior like a real car in all corners. The front and rear springs are multi-wound springs designed specifically for the LTS, and the roll that effectively uses rebound further enhances the sense of weight.

At the front, the aluminum steering block with the upper arm mounted high reduces the excessive nose dive that tends to occur in rolling machines, achieving both moderate reduction in understeer and controllability. The kingpin angle can also be changed, so the camber change when turning the steering wheel is realistic, making low-angle video shooting even more fun.

 

Feature:

Based on the MD1.0, the LTS chassis kit has high-mounted heavy objects and a customized roll center.

The flexible suspension operation and high center of gravity setting allow cornering while maintaining the same roll as a real car.

The front and rear springs use long and multi-layer springs exclusive to the LTS, and in combination with the smooth movement of the aluminum shocks, the suspension is flexible.

The steering angle is designed to maintain a deep drift angle, but the high-mounted upper arms allow for smooth cornering with less snagging.

The front steering block with variable kingpin angle is high-mounted. The balance of the front and rear roll centers is significantly different, making it possible to stabilize the rear load.

The front uses a 9mm offset axle hub with a wide tread setting. It is possible to maintain an angle up to the very limit of steering lock, contributing to increased impact.

The most distinctive features are the high-mounted battery and high-mounted motor. It is easy to maintain the rolled state, creating a sense of weight like a real car.

The battery holder can be slid back and forth, allowing you to fine-tune the weight balance by changing the motor position.

The battery holder can be mounted inline in the front and rear directions of the chassis by changing the mounting position. The load on the front can be increased while keeping the center of gravity high, which increases the steering control area.

The front and rear suspension arms are graphite lower arms, a feature of the MD series. The hanging mount allows for a wide range of roll center adjustments.

The rear suspension arms have been changed to a bold design with more hollowing out. The flexibility has been greatly improved, balancing moderate lateral escape and traction, contributing to a high sense of stability.

Vertical style upper deck. By increasing pitching rigidity and moving in the roll direction, it has a positive effect on the front and rear balance during drifting.

The motor can be rotated with the mount around the spur gear axis. If the battery is set closer to the front, a lower motor position can be selected, so the weight balance can be set according to the road grip.

The rear ESC mount is also standard equipment. It kills two birds with one stone because it is easy to wire and can also earn rear load.

<SPEC>

■ 1/10 scale electric RWD drift car
■ Overall length: 425mm
■ Overall width: 198mm
■ Wheelbase: 256mm
■ Secondary reduction ratio: 1:2.6
■ Fully equipped weight: 1500g
■ 2.4mm thick lightweight graphite main chassis
■ High mount battery holder
■ High upper aluminum front steering block
■ Vertical mount graphite upper deck
■ High traction graphite rear suspension arm
■ Aluminum rear bulkhead compatible with both 3 and 4 gears
(MD-CON4 4 gear conversion kit)
■ Differential height adjustment
■ New ultra-lightweight slide rack steering system
■ Graphite rear ESC mount
■ Motor position adjustable
■ Front and rear aluminum shock towers

*The kit does not include body, wheels, tires, motor, shorty batteries, pinion gear, and other R/C electrics.