Yokomo RD-301AE Aluminum suspension mount E for RD2.0

This mount is a great aluminum option part, but it is an "E" size sus mount which is wider than the plastic RR sus mount on the RD2.0. You cannot install it with stock RF sus RD2.0 plastic resin mount, as that's too narrow and will have too much toe-in. It's also thinner than plastic stock mount, so you can add 1 or 2mm shim under AL sus mount to increase skid angle more compared to stock plastic sus mount. You will need the Yokomo "D" size Yokomo AL sus mount for the RF position to use with this "E" mount. Base setting: 59.2mm RF "D" sus mount = #2 bushing (out) & 60.8mm RR "E" sus mount = #5 bushing (in) for 1.1 toe-in spec.

One additional note...when using the AL sus mounts in place of stock plastic sus mounts, the position of the sus pins will sit 1mm lower, changing roll center. If you want to retain the same height/roll center, you need to add 1mm spacer Y2-301SA.under it.