Yokomo YZ-RSG3 Running Set w/2.4G-RSⅢ for 1/10 RC-Car

A general-purpose controller set that can be used for various 1/10 size electric RC cars. A transceiver, a steering servo, a speed controller, a running battery and a quick charger are included in a set, and you can run by separately preparing a motor suitable for your machine.
The new 2.4GRS transceiver has dramatically improved responsiveness compared to the past, and it is now possible to operate as desired to accurately reflect the driver's operation. Steering Dual rate, end point, reverse, etc. can be set, and the fine movement of the steering which is important for quick driving of the direct drive machine can be freely controlled.

Major features
■ Uses a highly reliable FHSS / 2.4Ghz transmission / reception system
■ Micro receiver
■ Steering / Throttle trim
■ Steering / Throttle Endpoint Adjust
■ Steering / Throttle reverse function
■ Steering dual rate
■ 3-channel transceiver
■ The included SCR-DS speed controller supports brush motors up to 12 turns
■ Delta peak detection type AC100V quick charger

* To use this, an alkaline battery for the transmitter (AA size x 4) is required separately.

set content
1. 2.4G-RSIII transmitter (2.4Ghz FHSS system)
2. 2.4G-RSIII receiver (2.4Ghz 3 channels)
3. S-005 Steering servo
4. SCR-DS high power type speed controller (for brush motor 12 turns)
5. YB-14SP 1400mAh NiCd battery
6. AC-12D Delta Peak Quick Charger