Hitec 61169 Waterproof Brush Motr ESC HT60 (Tamiya Type Connector)
Features
Waterproof brushed motor ESC with excellent output capacity and various protection functions
Waterproof
● Built-in capacitor, waterproof and dustproof. Designed for all weather conditions.
Brushed Motor
● Ideal for stepping up from entry-level models, this is a mid-class ESC for brushed motors
BEC 3A/6V
● Equipped with a switching-type high-current output BEC (3A/6V) that can also be used with high-torque servos. Maximize the servo's capabilities.
● Equipped with a high-quality special circuit to reduce the effects of surge currents and protect the equipment.
● Auto throttle calibration that even beginners can perform with confidence provides accurate calibration and stable operation.
● Equipped with a low-voltage auto-cut function that is safe even for lipo batteries, where over-discharging can be fatal. Equipped with temperature protection to safely protect the ESC for a long period of time.
● The operating mode can be easily set with a jumper plug.
You can choose from three operating modes.
[1] F/B/R: Forward/reverse mode (with brake)
[2] BOAT: Forward/reverse mode (with drag brake)
[3] F/B: Forward/reverse mode (without brake)
Compatible types
1/10, 1/12, 1/16 On-road, off-road, short course, buggy, crawler, boat
Connector type
●Tamiya type
Set contents
ESC
Double-sided tape for main unit installation
Instruction manual
Basic specifications
Forward: Continuous/peak current 60A/360A
Reverse: Continuous/peak current 30A/180A
Compatible battery Li-Po 2 cells, Ni-MH 6 cells
Compatible types 1/10, 1/12, 1/16 On-road, off-road,
Short course, buggy, crawler, boat
Compatible motor speed (T)
2-cell Li-Po or 6-cell Ni-MH 540,550 motor 15T or higher or 30000rpm@7.2V or less
Internal resistance Forward: 0.001Ω Reverse: 0.002Ω
BEC output voltage 3A/6V (switching control)
Size 34.5 × 30.2 × 20.5 mm
Weight 42g
Hitec 61170 Waterproof Brush Motor ESC HT70 (Deans T Plug Connector)
Features
Waterproof brushed motor ESC with excellent output capacity and various protection functions
Waterproof
● Built-in capacitor, waterproof and dustproof. Designed for all weather conditions.
Brushed Motor
● Ideal for stepping up from entry-level models, this is a mid-class ESC for brushed motors
BEC 3A/6V
● Equipped with a switching-type high-current output BEC (3A/6V) that can also be used with high-torque servos. Maximize the servo's capabilities.
● Equipped with a high-quality special circuit to reduce the effects of surge currents and protect the equipment.
● Auto throttle calibration that even beginners can perform with confidence provides accurate calibration and stable operation.
● Equipped with a low-voltage auto-cut function that is safe even for lipo batteries, where over-discharging can be fatal. Equipped with temperature protection to safely protect the ESC for a long period of time.
● The operating mode can be easily set with a jumper plug.
You can choose from three operating modes.
[1] F/B/R: Forward/reverse mode (with brake)
[2] BOAT: Forward/reverse mode (with drag brake)
[3] F/B: Forward/reverse mode (without brake)
Compatible types
1/10, 1/12, 1/16 On-road, off-road, short course, buggy, crawler, boat
Connector type
●Deans type
Set contents
ESC
Double-sided tape for main unit installation
Instruction manual
Basic specifications
Forward: Continuous/peak current 60A/360A
Reverse: Continuous/peak current 30A/180A
Compatible battery Li-Po 2 cells, Ni-MH 6 cells
Compatible types 1/10, 1/12, 1/16 On-road, off-road,
Short course, buggy, crawler, boat
Compatible motor speed (T)
2-cell Li-Po or 6-cell Ni-MH 540,550 motor 15T or higher or 30000rpm@7.2V or less
Internal resistance Forward: 0.001Ω Reverse: 0.002Ω
BEC output voltage 3A/6V (switching control)
Size 34.5 × 30.2 × 20.5 mm
Weight 42g
Hitec HMJ500 Lipo Safety Bag
Basic specifications:
Material: Fireproof glass fiber cloth (inside), non-woven fabric (middle), PVC fiber cloth (outside)
Size: Approx. H100 × W190 × D110mm
Weight: Approx. 96 g
*This product is intended to reduce damage in the unlikely event of a LiPo fire.
Features
A fireproof and safe "Li-Po bag" that is perfect for charging and storage!
Storage bag for LiPo batteries with a pop design featuring illustrations
The cable can be pulled out from the charging hole on the side, so charging can be started easily
The inner fireproof glass fiber cloth, the middle layer of flame-retardant non-woven fabric, and the outer layer of PVC fiber effectively block air, improving safety during charging
Double zipper specification provides both convenience and airtightness
The short size is the perfect depth for storage. The short size can store 20 batteries, and the round type can store 8 batteries!
