Aluminium Body Mounts
For GALM and GALM ver.2
OVERDOSE first Aluminium Rear Body Mount is now available.
By shifting Body Mount Position towards rear, you can use OD Rear Body Catcher. You can also use with Manget as well.
Post position is 45 (43)mm, 40 (48)mm, 55(53)mm. ( ) outside diameter
Width can be chosen 88mm (inside) or 108mm (outside)
M3 screw holes will ensure you can use magnet type body mount.
[PO APR 2025] OVERDOSE OD2883 Aluminium Body Mount - Purple
[PO APR 2025] OVERDOSE OD2884 Aluminium Body Mount - RED
[PO APR 2025] OVERDOSE OD2885 Aluminium Body Mount - Black
Aluminium Rear Uprights for Galm
Aluminum rear upright is now available in the ES series!
Easy setup of the machine with simple design, compact and lightweight!
ES aluminum rear upright is new. The mounting position of the upper arm is set to the same 3 positions as the normal. Considering versatility, it supports suspension shafts of φ2.6 and φ2 by adopting a suspension shaft sleeve. In addition, the height of the suspension shaft can be set in two stages (normal position, 2mm down), so even if the height of the suspension mount is lowered, the suspension arm can be corrected to the appropriate angle. The weight is about 6g and a lightweight finish! Available in 3 colors: purple, red, and black.
*If the suspension pin is lowered by 2mm, it may interfere with the type of suspension arm or wheel.
[PO APR 2025] OVERDOSE OD2897 ES Aluminium Rear Upright for Galm Purple
[PO APR 2025] OVERDOSE OD2898 ES Aluminium Rear Upright for Galm Red
[PO APR 2025] OVERDOSE OD2899 ES Aluminium Rear Upright for Galm Black
Adjustable Aluminium Rear Suspension Arms Type 3
Achieve high performance with an ultra-lightweight, fully adjustable suspension arm!
Adjustable aluminum rear suspension arm Type-3 is back in stock. The 4-piece structure allows for a wide range of settings for arm length, trailing angle, shock mounting position, and wheelbase. Arm length can be adjusted in 1mm increments from 53mm to 42mm. Trailing angle can be selected from 0 degrees, 3 degrees, and 6 degrees. The front-to-rear width of the suspension arm is 7mm narrower than the standard, so the wheelbase adjustment range is wider than ever before. Multifunctional and highly rigid, yet ultra-lightweight with only an increase of 2.8g (compared to the standard)! You can achieve the best performance without having to worry about weight balance!
[PO APR 2025] OVERDOSE OD2855 Adjutable Aluminium Rear Sus Arm Type 3 (Purple)
[PO APR 2025] OVERDOSE OD2856 Adjutable Aluminium Rear Sus Arm Type 3 (Red)
[PO APR 2025] OVERDOSE OD2857 Adjutable Aluminium Rear Sus Arm Type 3 (Black)
