OVERDOSE (Re-Production): Personalize Your Build with OVERDOSE's Colorful Aluminum Upgrades

*Please note, this is re-production. 

TC Aluminium Rear Up Upper Bracket (For Galm)

Wide offset mount on the rear upper arm!
Greatly improved drift controllability and traction performance! !!

Rear upper arm bracket produced by OD support driver TAKE-C. By using this bracket, it can be offset mounted to the outside in 3 steps of 7, 9, 11 mm with respect to the standard position. The load applied to the tires is instantly controlled by quick load transfer and roll, and the machine is surely led to the acceleration system. In addition, the compatibility with the TC low mount suspension mount is also the best, and it is possible to optimize the suspension geometry by widening both the lower and upper. It can be attached to both normal resin and optional aluminum upper arm cloaks. Available in three colors: purple, red, and black.

OVERDOSE OD2848 TC Aluminium Rear Up Upper Bracket (Purple)

OVERDOSE OD2849 TC Aluminium Rear Up Upper Bracket (RED)

OVERDOSE OD2850 TC Aluminium Rear Up Upper Bracket (Black)

High Mount Kit for Galm. Galm ver2

This is a "high mount kit" for changing GALM, GALM ver.2 to a high mount motor layout. The motor can be mounted in three locations on the spur gear: front, center, and rear, allowing for a setup that suits your driving style. Also, with an idler gear as standard equipment, both positive torque and half torque motor layouts are possible. It is also possible to make it without a center mount with the aluminum rear brace designed specifically for this kit. It is a highly expandable kit that can be made into various specifications depending on your ideas.

*The gear drive set cannot be used when the spur gear is on the left side of the chassis.

OVERDOSE OD2877 High Mount Kit (for GALM, Galm V2 Black)

OVERDOSE OD3877 High Mount Kit for Galm. Galm ver2 / Purple

OVERDOSE OD3878 High Mount Kit for Galm. Galm ver2 / Red

Aluminum Chassis Rigid Post (For GALM Series)

Actively control chassis rigidity!
It is possible to set the chassis characteristics according to the machine layout and setting! !

It is a chassis rigid post that can set chassis rigidity and roll characteristics by connecting the main chassis and upper chassis. Unlike general posts, it is possible to further increase chassis rigidity by setting the main chassis side to 2 points. Furthermore, by combining with the OD2972 anti-twist chassis set, you can select the post mounting position from 3 locations. It is possible to respond flexibly to various layouts of heavy objects such as motors and batteries.

OVERDOSE OD2961 Aluminium Chassis Rigid Post GALM / BLACK

OVERDOSE OD3730 Aluminum Chassis Rigid Post (For GALM Seri

OVERDOSE OD3731 Aluminum Chassis Rigid Post (For GALM Seri

Aluminium Rear Upper Arm Mount For Galm

Aluminum rear upper arm mount for GALM. Made of highly rigid aluminum, it maintains an accurate camber angle while driving. Dress up your machine with a complex and delicate design shape carved out by machining. In addition, by setting the mounting position to the shock tower in two stages, you can choose from a total of 8 mounting positions for the upper arm.

OVERDOSE OD2404b Aluminium Rear Upper Arm Mount (for GALM / Black)

OVERDOSE OD3867 Aluminium Rear Upper Arm Mount For Galm / Purple

OVERDOSE OD3868 Aluminium Rear Upper Arm Mount For Galm / Red

TC Aluminium Low Mount Sus Mount 43.7mm

The popular TC Suspension Mount is finally released separately by expanding the range of suspension settings and supporting various driving styles.

Available in purple, red and black color for each size of 43.7mm, 48.2mm and 52.7mm.
Choose the size and color suits for your driving style and chassis settings. Pivot balls and spacers are not included.

OVERDOSE OD2920 TC Aluminium Low Mount Sus Mount 43.7mm (GA

OVERDOSE OD2921 TC Aluminium Low Mount Sus Mount 43.7mm

OVERDOSE OD2922 TC Aluminium Low Mount Sus Mount 43.7mm (GA

TC Aluminium Low Mount Sus Mount 48.2mm

The popular TC Suspension Mount is finally released separately by expanding the range of suspension settings and supporting various driving styles.

Available in purple, red and black color for each size of 43.7mm, 48.2mm and 52.7mm.
Choose the size and color suits for your driving style and chassis settings. Pivot balls and spacers are not included.

OVERDOSE OD2923 TC Aluminium Low Mount Sus Mount 48.2mm (GA

OVERDOSE OD2924 TC Aluminium Low Mount Sus Mount 48.2mm (GA

OVERDOSE OD2925 TC Aluminium Low Mount Sus Mount 48.2mm (GA