It has been redesigned as an airplane battleship to complement the air warfare and has been reproduced in fine detail with new parts.
Products are unpainted kits that require glue assembly and painting.
The scale is 1/700, and the bottom of the ship is not included.
This product is composed of traditional (special series) molds and newly designed additional parts.
The Battleship Ise was planned as the previous Fuso-type No. 3 ship, but it was built in the Taisho period as a separate design from the experience of Fuso and Yamagi.
In the 196, we worked at Kawasaki Shateryard, and changed the position of the 3 and 4 turret compared to the Fuso-type gun.
Modern renovations were performed during 10-12 and include bulge enhancements and fleet extensions and are held as the main line.
In the Pacific War, there is no positively poke or engagement. It was redesigned to be an airplane battleship due to loss of aircraft warfare in June 17. It was attacked with airborne mothers Zuho and Zuho in October 19, and it was returned to the U.S. military attack in July after a big defeat.
The product is based on the appearance of Shuichi October 19, the Ise Battleship No. 1 Ise model battleship Ise.
The contents include the Zui clouds and comets that are planned to be equipped with an aviation work deck in the late half of the shipment.
We have newly designed parts to unify the differences in the reproductions of equipment depending on the production date of the product, and some parts have been divided into consideration of the painting process.
The No. 21 electrical search is a more delicate sculpture than conventional included parts, such as the insulator base for securing the elements on the front.
The 22 electric search is made with a sliding mold, making it possible to change the opening into a part, and the wrapper shape can be extended.
The 5.0 inch (12.7 cm) consecutive high angle gun A model has been subdivided into all 4 parts, increasing the resolution of the modeling from the 2 parts of the existing product.
The 9.2 yd (9 m) cutter has been made into 2 parts for painting. The mount is equipped with separate parts and can be selected with a solid mold on the top. (except some parts)
The 12 meter aircraft takes into account the painting of the canvas, the pilot room/machine canopy is made into separate parts. Each coat is applied and assembled and bonded to a later period of time.
The 3 part configuration allows the vehicle to be assembled and assembled after painting to eliminate the need for masking.
The 9 meter cutter cradle has a molded shape and light holes for an even more precise feel.
A new chrysanthemum crest of the ship neck.
The fender lamp is now available and can be used to create additional expressions in the parts that have been supplemented.
Includes decals for the Kantail ship name (warship color painted mushy tone) and the mast white line.
The 96 type 1.0 inch (25 mm) consecutive aircraft guns have reduced paint and painting work as standard specifications.
The Kanbridge/air defense command includes binocular telescope parts that increase precision in detail.
The hull is one piece of one piece of the left and right side of the fender.
The fleet (fender) is designed separately from the battleship Ise model.
The upper deck is a single piece structure of a delicate wood deck.
The lower layer parts such as the kanbridge base (kanbridge deck), high angle cannons are one-piece parts made by sliding molds.
The Kanbridge is composed of stacking and assembling each layer, and the floor surface has been detailed sculptures.
Each part of the klebridge has also been made into parts including the search signal lights, aircraft guns, and rattles.
Aviation work deck uses separate elevator parts, and the same height of the orbital and deck surface are differentiated by delicate carving.
The chimney is made of 2 parts that are glued on the left and right side, and the steam disposal pipe has been separated.
The stripe pattern on the floor such as the high angle cannon is expressed with fine carving.
The funnel cap is constructed with a precise feel when removed.
The main gun is a single piece of the barrel and the canvas and the angle of the perspective elevation is fixed
The main barrel is opened using a slide mold.
The gun is reproduced with special parts that have been increased to the second and third main cannon canopy.
The rear mast/cross tree is a distinguishing point from the second ship Sun, and has parts for Ise only.
Includes 2 models of aircraft and is molded in gray.
Both are included with 6 Zuuyu clouds and 6 comet bombs.
The 1.0 inch (25 mm) gun has a precise shape and a construction that is easy to paint and comes with a 2 part model that was used in 2018.
The color of the molding is gray molded with main parts and bottom boards, fleet machines, aircraft parts, etc.
Comes with 3 types of decals
Decal includes marking on the war ship and sunsigna.
・We have 3 sizes of military ship flags, etc. Actual dimensions of 10, 6, and 3 width are 1/700 scale.
Decals include watering notation, chrysanthemum crest of the ship of the ship (two types of gold and warship color filled).
A decal that includes Hidamaru markings on the fleet aircraft
Included Accessories:
Runner x 48
Assembly instructions x 1
Decal x 4
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.
