Description
Precision Nipper for Gate Cutting Plastic Model Kits
This precision nipper is convenient for cutting parts of plastic assembled models from the gate.
A curved type that is suitable for cutting in areas and narrow areas.
Single blade type with blade only one side for smooth cutting work.
Equipped with stopper screws (immo-screw type) to prevent overgrip on both sides to prevent the blade from being too closed, and a pin to prevent the blade from opening too much.
Includes protective cap and hex wrench to adjust stopper screws for convenient storage.
Cutting Capacity
Plastic Assembled Model Gate (middle part of runner and part)
Plastic rod: diameter less than 0.08 inch (2 mm) (recommended)
Product Materials
Product body: special steel
Grip/Protective cap: PVC.
Hex wrench: Chrome vanadium steel
Note:
For precision work, please be careful when using. This product is made for precision cutting, so it has a weak point in strength and durability compared to regular nippers. To prevent damage to the product and ensure its original performance, please be careful with the following contents.
Please do not apply too much force when working. If you apply too much force, it is easy to wear the blade and breakage of the edge. Be sure to cut with light force.
Do not twist or knock the blade edge during cutting. Also, please do not drop the product. It may be dangerous due to the broken blade or the broken edge of the blade.
When working, unintentionally broken edges and cut objects may fly. For safety, please use protective glasses, masks, gloves, etc., to ensure that there are no people or fragile items around the area before working.
This product is made specifically for gate cutting of common plastic assembly models. Use for cutting plastic parts marked PS, PE, ABS, PP. Do not use on other hard plastic (transparent/translucent PS, polycarbonate, FRP or acrylic resins, etc.) or materials that exceed the cutting capacity of the product.
Not suitable for cutting materials other than plastic. Do not use it.
This precision nipper is convenient for cutting parts of plastic assembled models from the gate.
A curved type that is suitable for cutting in areas and narrow areas.
Single blade type with blade only one side for smooth cutting work.
Equipped with stopper screws (immo-screw type) to prevent overgrip on both sides to prevent the blade from being too closed, and a pin to prevent the blade from opening too much.
Includes protective cap and hex wrench to adjust stopper screws for convenient storage.
Cutting Capacity
Plastic Assembled Model Gate (middle part of runner and part)
Plastic rod: diameter less than 0.08 inch (2 mm) (recommended)
Product Materials
Product body: special steel
Grip/Protective cap: PVC.
Hex wrench: Chrome vanadium steel
Note:
For precision work, please be careful when using. This product is made for precision cutting, so it has a weak point in strength and durability compared to regular nippers. To prevent damage to the product and ensure its original performance, please be careful with the following contents.
Please do not apply too much force when working. If you apply too much force, it is easy to wear the blade and breakage of the edge. Be sure to cut with light force.
Do not twist or knock the blade edge during cutting. Also, please do not drop the product. It may be dangerous due to the broken blade or the broken edge of the blade.
When working, unintentionally broken edges and cut objects may fly. For safety, please use protective glasses, masks, gloves, etc., to ensure that there are no people or fragile items around the area before working.
This product is made specifically for gate cutting of common plastic assembly models. Use for cutting plastic parts marked PS, PE, ABS, PP. Do not use on other hard plastic (transparent/translucent PS, polycarbonate, FRP or acrylic resins, etc.) or materials that exceed the cutting capacity of the product.
Not suitable for cutting materials other than plastic. Do not use it.