Yokomo RD-301AD Aluminum suspension mount D for RD2.0

This is the same width "D" setting sus mount in aluminum for the RD2.0 to replace the stock plastic sus mount using a #1 bushing to keep the 1.1deg rear toe-in. Yokomo now has the "D" & "E" sus mounts for the RD2.0, but they are not marked D or E. This sus mount has a dot on each top side end to identify it as the "D" mount. The AL mount is 1mm lower than the stock plastic sus mounts, so if you install this and want to retain same height position/roll center, you need to add a 1mm spacer under it (Yokomo Y2-301SA). If you add this only and use the stock RF plastic mount, with no 1mm spacer, your rear suspension will become anti-squat with 1mm higher RF mount setting.