The very popular Moto GP machine has been shrunk down to a 1:18 scale model that will fit in the palm of your hand. The YAMAHA YZR-M1 is now under your control, ready to battle with your friends on Mini-Z size race tracks. Looking at the high demand for the 1/8 scale Moto GP Bikes, and the number enthusiasts of R/C motorcycles all over the world the Mini-Z Moto Racer was a no brainer. However, it's not easy for beginners to get used to driving an R/C motorcycle because a two-wheel vehicle is naturally unstable at the low speed range. The MINI-Z Moto Racer has adopted sophisticated technologies to overcome this problem and has lowered the hurdle while maintaining the fun of control. Anybody can now jump into this genre and feel the fun of two-wheel vehicle driving. The first hobby grade R/C Micro Motorcycle at this size! The innovative E-gyro system equipped within the rear wheel keeps the bike going straight even running at a super slow speed while realizing quick leaning action at a high speed. With the digital proportional system for steering and throttle, you can control the bike as if you're riding it! No special technique is required to drive it... If you're an experienced R/C car driver, you'll only need a short period of practice to get used to it. Even if the bike falls down, no worries! The support bars hold the bike at a certain angle and help restart it when throttle is applied. Equipped with a high power core-less drive motor, lightweight 3.7V 120mAh LiPo battery, and ten ball bearings the bike accelerates up to 20km/h and realizes up to 10-minute runtime. Thanks to the E-gyro system, the Mini-Z Moto Racer can run virtually on any smooth on-road surfaces.