Ko Propo 10777 DEVICE 2024 LIMITED EDITION
Atsushi Hara x KOPROPO
Introducing a special collaboration model with world-renowned driver Atsushi Hara! This exclusive edition faithfully recreates DEVICE’s iconic logo design, which garnered widespread acclaim in the past. The matte clear coating seamlessly blends with the pearl black finish, delivering a refined, premium texture.
Dish design aluminum wheel
The steering wheel features a dish design, meticulously crafted through precision machining to recreate the original look. It incorporates purple-anodized aluminum wheel, showcasing a beautiful form enhanced by a special laser engraving, delivering a unique and exclusive feel.
The purple color, symbolic of Hara's signature style.
The exposed screws on the transmitter body have been replaced with purple-anodized aluminum, creating a cohesive design that extends to the back.
Plated parts with meticulous attention to detail.
The power key and BT1 key feature a custom purple finish, serving as accent colors that effectively enhance the overall cohesion of the design.
A carbon-look plate, exclusively designed for the 2024 DEVICE edition.
The DEVICE 2024 features a custom-made grip plate as well. It adopts a stylish, textured crash carbon finish that exudes a unique custom feel. A special film with a three-dimensional pattern has been transferred and finished with a clear coating, adding depth to its design.
Standard equipment includes the special design battery stand.
This set comes standard with a battery stand that can accommodate a battery, featuring silk printing tailored to the DEVICE 2024 specifications. Additionally, each unit is engraved with a unique number on a brass plate, enhancing the value of this limited edition with a serial number plate. *Serial numbers cannot be specified.
The receiver also features purple plating.
The included KR-420XT receiver also features purple plating on its upper case, enhancing its presence when mounted on the machine.
[Limited] DEVICE 2024
No.10777
[Specifications]
# Dimensions:256.0x170.0x127.5mm
(Does not include protrusions)
# Weight: 563g(battery not included)
# Power supply:
AAA size dry battery x4,
Ni-MH battery x4,
Li-Fe battery(2cell 6.6V),
Li-Po battery(2cell 7.4V),
(Batteries are sold separately.)
# Current: 200mA or less
# Channel: PWM 4ch / Serial 8ID
*Maximum setting ID number of serial are different by each products.
# Frequency: 2.4GHz
# Radio Mode: XT
# Model memory 50
# Compatible receiver:
KR-420XT,
MINI-Z EVO 2 receiver unit for KO compatible transmitter,
MINI-Z EVO Receiver Unit EX-NEXT MC-8
Note: There are no changes to the specifications of the radio.
Ko Propo 40456 VFS-FR3
[Specifications]
#Dimensions: 32.6× 29.0× 19.4mm
#Weight: 25.3g (Main Unit Only)
#Compatible motor: Brushed motor unlimited
#Maximum peak current: 1200A (FET Spec)
#Maximum continuous current: 300A (FET Spec)
#Rated Current: 120A (FET Spec)
#Drive Frequency: 0.50(±0.3) - 7.00(±0.3)kHz (64 steps)
#Operating voltage: 6.6 to 8.4V (BEC output voltage: 6.0V)
#BEC output 6.0V/3A
Made in Japan.
-
An Easy-to-Use ESC for Beginners and Veterans Alike
A simple, ready-to-use design that allows you to install it right out of the box. It comes with preset programs that are compatible with any car. Additionally, motor connections are made easy with connectors, ensuring a hassle-free setup. Just follow the manual for initial setup, and you'll be ready to drive in no time.
Equipped with a Low Voltage Cutoff Function!
Lithium Polymer and Lithium Ferrite batteries can be damaged by over-discharge, but the VFS-FR3 is equipped with a low voltage cutoff function, allowing you to play without worrying about over-discharge. In the past, a PC was required to change the settings, but now with the VFS-FR3, you can select the battery mode during the initial ESC setup. You can also check which battery mode is selected by the LED status.
Available modes: Lipo/LiFe/NiMH, NiCD
Back Timer Setting Function Added
You can now set the time delay before entering reverse after pulling the trigger on the transmitter. This feature helps prevent accidental reversing during fine brake control, similar to pumping the brakes. During the initial ESC setup, you can choose from three levels. Additionally, more detailed settings can be adjusted using the manager software.
Compatible with KOPROPO's proprietary HCS
Now compatible with KOPROPO's proprietary "HCS" system, reducing the communication processing time between the receiver and ESC by 1/4 for a more direct control feel.
The mode automatically switches when connected to an HCS-compatible receiver. Of course, it can still be used in normal mode, so no changes are needed from previous compatible models.
Powerful BEC Circuit for Safe Use with Two Servos!
Equipped with a 6V 3A BEC circuit (receiver/servo power circuit), the VFS-FR3 uses high-capacity components, unlike the 1.5A parallel elements often found in overseas products. This ensures that even when using two high-current servos for 4WS systems, the circuit will not be damaged. Additionally, the built-in limiter function activates in the event of issues like steering lock, so you can use it with peace of mind.
Suitable for Experienced Drivers!
While you may start with the standard motor from the kit, as you gain experience, you'll want to push for more speed. The VFS-FR3 has no motor turn limit, so when you're ready to unleash even more performance, you can adjust the drive frequency to maximize the potential of high-spec motors. It delivers the same powerful output as the VFS-FR2.
Feature
# Foward / Reverse / Brake function.
# KO Variable frequency system setting.
Foword 32 divide step positions, 64 frequency settings# Factory setting installed.
Recommend setting (please use motor as below)
[LIPO] over 12T recommended
[Life,NiMH] over 23T recommended# Reverse cancel setting.
# Equipped with voltage cutoff (Selectable modes: Lipo/LiFe/NiMH, NiCD)
# Back timer can be set before entering reverse mode
# Neutral brake function
# Using "VFS FR Manager Ver3.0" allows for more detailed settings.
Attention
*You can not use setting card for the VFS.
*If you want to change the cut off voltage and each parameter, you must use the PC and ICS USB Adapter HS.Contents
ESC ×1 (with Silicon wire)
Heat sink x1(installed)
Name plate ×1
