Description
<Servo model selector included>
【spec】
● Torque: 8.2Kg ・ cm Speed: 0.08sec / 60 °
(At 7.4V)
● Torque: 7.0Kg ・ cm Speed: 0.09sec / 60 °
(At 6.0V)
● Size: 40.5 x 26.5 x 21 mm (low pro type)
● Weight: 48.0g
● Power supply: 6.0-7.4V
(Lipo, Rife, NiMH, NiCad)
● Aluminum final gear
● Internal brass gear (some resin gears)
● Coreless motor
● Dual ball bearing
● Aluminum top case
● Aluminum heat sink middle case
● Black Servo Lead
● Gold-plated connector
● HCS compatible
■ Specially designed servo specializing in 2WD drills!
RSx3-one10 Ver.D, which inherits the gene of RSx One10 that has been active in many races, is a specially designed servo specializing in 2WD drills.
Equipped with a stylish laser engraving and milled aluminum top case in a low-pro type case size that is ideal for the 1/10 category. Inheriting the smooth and linear operation unique to RSx, you will be able to perform dynamic drift with a high sense of actual vehicle. The hunting problem, which tends to cause problems when using a gyro with a 2-wheel drive, is also less likely to occur with RSx3-one10 Ver.D. Five types of data that match various road surface conditions and usage conditions have been installed.
Please experience a higher-grade drift driving.
■ Stylish laser engraving + milling top case
Laser marking is applied to 3 sides of the top case and 2 sides of the middle case. In addition, a sophisticated image is secured by advanced milling cutting. By using a chic black alumite color, you can install it on any drift chassis without any discomfort.
The middle case uses an aluminum heat sink with excellent heat dissipation efficiency and an accent milling process, and metal gears are used for the gears (some gears are resin gears).
■ Excellent compatibility with the drift gyro KG-X
Milling and laser engraving are ideally compatible with the drift-only steering assist gyro KG-X. Even in terms of operating characteristics, it is optimized when used in combination with the KG-X.
* KG-X is not included with this product.
Please use the advantageous SG-1 which is a set of RSx3-one10 Ver.D, KG-X, and servo model selector.
■ Black servo lead that is easy to handle
Commitment extends to servo leads. The black cable, which looks tight, has the optimum softness for handling while ensuring the required current capacity.
■ New high-speed communication system HCS compatible
The communication processing time between the receiver and the servo has been reduced to 1/4, and the servo operation feeling has become even more direct.
Since the HCS compatible servo automatically detects the signal from the receiver, it can be used without setting any receiver regardless of whether it is HCS compatible or not.
When using with HCS, please use in combination with the compatible receiver KR-415FHD.
■ 5 types of presets are available!
Five types of presets are registered in advance in RSx3-one10 Ver.D. By switching this with the servo model selector, it is possible to easily change the setting to suit the machine and course. It covers all user groups from beginners to experts, and can be set according to the road surface conditions.
[Model 1] Easiest: The setting that is the easiest to maneuver
[Model 2] Easy: Easy-to-maneuver settings
[Model 3] Standard: Standard setting (factory setting)
[Model 4] Fast: Fast setting
[Model 5] Expert: Setting for experts
An example of using the servo model selector is introduced on this blog!
■ ICS for your favorite settings!
If you use the latest dedicated software "ICS Servo Manager", you can freely rearrange the characteristics of RSx. For example, stretch parameters. If the holding power is strong on a high-grip road surface and weak on a low-grip road surface, you can adjust the parameters according to the road surface condition to achieve the optimum servo for the machine. Parameters can be set more finely than conventional products.
set content
Servo body x 1
Grommet x 4
Horn stopper screw x 1
Servo model selector x1