Description
● Torque: 8.2Kg ・ cm Speed: 0.08sec / 60 ° (at 7.4V)
● Torque: 7.0Kg ・ cm Speed: 0.09sec / 60 ° (at 6.0V)
● Size: 40.5 x 26.5 x 21 mm (low pro type)
● Weight: 42.1g
● Power supply: 6.0-7.4V
(Lipo, Rife, NiMH, NiCad)
● Aluminum final gear
● Internal brass gear (some resin gears)
● Coreless motor
● Dual ball bearing
● Aluminum heat sink middle case
● Gold-plated connector
● HCS compatible
* Ver.D Lite-R is a setting that gives Ver.D Lite an aggressive direction.
* Drift-only servo that suppresses the occurrence of gyro hunting.
* ICS function is not supported. Parameter adjustment and model memory cannot be switched.
■ Specially designed servo specializing in 2WD drills!
RSx3-one10 Ver.D Lite-R has been installed with special parameters specialized for drift after many test runs.
You will be able to perform stable drift driving more easily.
RSx3-one10 Ver.D Lite-R has been finished as an adjustment with aggressive characteristics added by RSx3-one10 Ver.D Lite, which has been well received for its mild parameter settings that match the drift. The hunting problem, which tends to cause problems when using a gyro with a 2-wheel drive, is less likely to occur as with RSx3-one10 Ver.D.
Click here for information on RSx3-one10 Ver.D Lite
Like Ver.D Lite, Ver.D Lite-R uses a resin top case at an affordable price.
Like Ver.D Lite, Ver.D Lite-R does not have a model memory switching function, but even with standard parameters, it exhibits optimal performance for drifting.
The low-pro type case size, which is ideal for the 1/10 category, inherits the smooth and linear operation unique to the RSx, enabling dynamic drift with a high sense of actual vehicle. The hunting problem, which tends to cause problems when using a gyro with a 2-wheel drive, is less likely to occur.
Its ability to faithfully utilize the assist effect of the popular gyro "KG-X" is equivalent to RSx3-one10 Ver.D.
* ICS function is not supported. You cannot adjust parameters, add model memory, or switch. *
Click here for information on RSx3-one10 Ver.D
■ Excellent compatibility with the drift gyro KG-X
Optimal compatibility with the drift-only steering assist gyro KG-X. Even in terms of operating characteristics, it is optimized when used in combination with the KG-X.
* KG-X is not included with this product.
set content
Servo body x 1
Grommet x 4
Horn stopper screw x 1