New parts for 25mm aircraft guns and electric probe are added in the final form of attending the battle of the Late Offshore Sea.
Products are unpainted kits that require glue assembly and painting.
The scale is 1/700, and the bottom of the ship is not included.
This product is composed of traditional (special series) molds and new additional mold parts.
The heavy cruiser ship "Aizaga" is a ship model that has improved and modified the predecessor of the refined model, and is built as a court type cruiser.
The second ship "Aigan" was made by the Kurenaval Koyu and the Yokokosuka Chinju-federal association in 197.
The same model includes 3 warfs, including Takao, Birdsea, and Hashi, and the 8.1-inch (20.3 cm) round turret that can be used to achieve aerial shooting, and has 5 elevation angles.
It was renovated in 1975 and the rear mast has been relocated to reduce the size of the klebridge, attaching bulge and improving community.
During the opening of the war, engaged in the Southwest strategy, and then moved towards the Isle and participated in the Second Solomon Sea Battle of the South Pacific Sea, and the Third Solomon Naval Battle.
In the Battle Off the Leite offshore October 19, 4 torpedos were submerged by the lightning strikes of the US submarine.
This product features the appearance of the Laite Shore Sea Battletime October 19, Takao-type No. 2 ship "Aiga".
The structure is made of a large number of special parts such as the Kanbridge that was contracted from Aiga and Takao only pre-war, and the rear mast moved to the back.
A new mold was used to unify the differences in the reproduction of the equipment and other parts of the product due to the launch of the product, and the partitions were also taken into consideration of the painting process.
The No. 13 electrical search is a new enclosed part with a sculpted expression in the truss structure, and the air line part also has a shape representation of the shape.
The No. 21 electrical search is a more delicate sculpture than conventional included parts, such as the insulator base for securing the elements on the front.
The No. 22 electrical search has been made into parts that have been opened using a slide mold.
The 5.0 inch (12.7 cm) consecutive high angle gun A1 Kai 1 has been subdivided into all 6 parts, increasing the resolution of the modeling from the 2 parts of the existing product.
The 9.2 yd (9 m) cutter has been made into 2 parts for painting. The mount is equipped with separate parts and can be selected with a solid mold on the top.
The 11 meter internal volcanopy, considering the painting of this product, the canvas and the shipper/machine canopy are made in separate parts. Each coat is applied and assembled and bonded to a later period of time.
The aircraft cradle is made with a mold that has uneven shapes and light holes, making it more precise to the model.
Comes with new parts including chrysanthemum crest on the front of the ship, fender lights on the side of the kleash, and lifesaving indicators.
Additional binocular telescope parts are added to the air defense command and and compass.
Includes decals for the Kantail ship name (warship color painted mushy tone) and the mast white line.
The 96 model 25 mm gun has been made to standard specifications with 2 parts that reduce painting and painting division.
Hull
The hull is a 1-piece construction that is molded together with the left and right sideward for a more stable structure compared to the left and right adhesive type.
The fender bulge is reproduced using different parts.
The recessed fender window on the fender, and the unobstructed fender windows and outlets that cover all around the fender are reproduced in 3D sculptures.
Upper board
The upper deck is a single piece and it has been sculpted to increase the detail of a linoleum deck and anti-slip iron tops.
The extended mono gun gun and ammo box have been reproduced in one piece molding on the top plate.
Each deck
The shelter deck has been made in separate parts, and the torpedo equipment compartment on the lower layer is accurately reproduced.
The aviation work deck has separate parts, and the sliding mold has been carved into vertical surfaces.
Kanbridge
The characteristic large klebridge structure is a 1-piece piece piece with engraving on 4 sides due to the use of a slide mold.
In order to express the difference between the same type of ship "Takao", we have prepared special parts for "Aigota".
Main Turret
The main barrel can be reproduced in any position depending on the angle of the turret bone, depending on the angle of the turres.
The side and top of the turret are detailed sculptured with the seams of the heat shield plate.
Comes with new mold parts from the same type of ship "Takao".
chimney
Both front and rear chimneys are split left and right handrails, and double scaffoldings are represented in delicate sculptures.
The chimney rain guard grate can be seen while the inner tube is removed.
The steam disposal pipe is a separate part from the chimney and reproduces individual differences between the same type of ships.
Mast Aviation Rigging
The rear mast is a one-piece molded truss structure on the lower part that makes it possible to recreate a detailed shape.
The water connaissance crane is made with a sliding mold that reproduces the truss shape on the side and top, and the hook is also represented in a delicate model.
The catapult (Kureishi No. 5) has been reproduced using a slide mold, and the side and top surface modeling.
Fleet aircraft
In order to improve workability (prevent damage during gate cutting), the molded color is gray.
Includes 2 each of the Zero (3 seat) water connaissance machines.
Included decals
Marking items such as military ship flags, flags, and the Hinamaru of the aircraft are included.
・We have 3 sizes of military ship flags, etc. Actual dimensions of 10 width, 6 width, and 3 width are 1/700 scale.
It includes the Hinomaru of the ship aircraft and the corresponding yellow belt (yellow band), and the Hinomaru includes those that do not have the white border during the late of the War.
A decal containing the mast white line and the ship name (two types of gold and warship color filled).
Included Accessories:
Runner x 34
Assembly instructions x 1
Decal x 2
This product is manufactured in Japan.
This product is a plastic model kit that requires assembly.
