Futaba 037191 T6K-V3S w/ R3006SB (Full Spring) for Air Plane/Robot/Multicopter (00008694-3)

Basic model with enhanced glider functions.
The "T6K V3S" uses the 2.4GHz two-way communication system, T-FHSS AIR, and has enhanced glider functions as well as airplane, helicopter, and multicopter functions, making it a high-performance radio that allows you to pursue infinite possibilities despite being a basic model.

●8ch Air Radio: Compatible with airplanes, helicopters, gliders, and multicopter.

●Telemetry function: Equipped with the two-way communication system T-FHSS Air. By combining the voltage of the receiver battery installed in the aircraft and various optional telemetry sensors, the transmitter can display various information about the aircraft, such as the power battery voltage, altitude, speed, and temperature.

In addition, you can use earphones to monitor the numbers by voice and issue warnings such as voltage drops with a vibrator.

●Backlit LCD: Adopts a large graphic LCD panel with backlight. It can display graphs such as EXP curves, making it easy to set up.
In addition, the display language supports seven languages, and Japanese is displayed in katakana.

●Built-in antenna: The handle has a clean design.

●Intuitive settings with jog keys and buttons

 

●Volume channel: Can be assigned as an auxiliary channel.

●Battery specifications: Can be used with four AA batteries. (Rechargeable batteries are also available separately)

Functions and specifications

Common functions (airplane/helicopter/glider/multicopter)

●30 model memories: Can be given unique names (up to eight characters)

●Wing type: Can set the main wing configuration for airplanes (5 types)/gliders (6 types) and the tail configuration (2 types).

●Swash type: Can set the helicopter swash type (6 types). (H-1/HR3/H-3/HE3/HN3/H-2)

●Program mixing (4 systems): Can be customized with four independent systems of mixing. (3 normal types, 1 curved (5-point) type)

●D/R (dual rate): Aileron, elevator, rudder

●EXP (exponential): Aileron, elevator, throttle (not in helicopter mode), rudder

●Failsafe: Can be set for all channels.

●Battery failsafe: The detection voltage can be changed according to the type of battery used. (T-FHSS Air mode only)

●Trim step: This function adjusts the amount of change per click of trim.

●Trim type: In addition to normal, you can select ATL (trim is ineffective on the high side) for throttle trim, and a mode in which trim is effective near the stick neutral position and becomes ineffective toward both sides of the stick for other trims.

●Stick alarm: An alarm can be sounded at a specified position of the throttle stick.

●Battery warning (alarm sound/vibrator): Notifies you when the battery level of the transmitter is low. You can also change the warning voltage according to the type of battery.

●Endpoint, digital trim, sub trim, reverse, servo display/servo test

●AUX CH: CH5 to CH8 can be assigned to your preferred switches and volumes.

●Timer (2 systems): The timer can be set for each model, so there is no need to set it every time you change models.

●S.BUS servo programming: You can set parameters for S.BUS/S.BUS2 servos.

●Trainer: This trainer function allows you to select the operating mode, such as limiting the operation channel according to the level of the person practicing or providing support only for counter steering.

●Trainer connector, earphone jack (compatible with 3.5mm stereo mini plug), S.IF connector: The S.IF connector is used to set the S.BUS servo and telemetry sensors.

●User name (up to 8 characters)

●Model copy, model transformer (model data transfer function (wireless))

●Screen adjustment (contrast, backlight)

●Radio wave format (2.4GHz): Compatible with T-FHSS Air and S-FHSS. Set on the model selection screen.

You can use T-FHSS Air-compatible receivers such as the R3008SB and R3204SB, and S-FHSS-compatible receivers such as the R2001SB, sold separately.

(Telemetry function is not supported in S-FHSS mode)

For details, please refer to the receiver compatibility list.

[For multicopters only]

●Flight mode

●Center alarm: An alarm can be sounded at the specified position of the throttle stick.

●Throttle curve

●Throttle delay

●Gyro: The gyro function for flight is usually built into the flight controller, so in this mode, use it to stabilize the camera, etc. You can adjust the gyro sensitivity (1 axis only) from the transmitter. (Compatible with our gyros)