Wave HT-561 Super Airbrush Trigger Type 07 (Lightweight Aluminium Bo

- Trigger type airbrush with a 0.7 mm nozzle bore diameter and hard to surfacer etc.
- The body is made of lightweight aluminum to make it easy to hang.

- It is a set of airbrush (handpiece) which is a necessity of finishing work of model making. The trigger type which fingers are hardly fatigued even for working for a long time is adopted as the operation method.
- The joint is also a general S screw (1/8) specification, and it can correspond to many air sources on the market.
- Nozzle aperture is 0.7 mm, you can use it conveniently for heavy blowing and large area painting. Moreover, paint with large particles, such as surfacers and metallic colors, is also hard to become.
- Aluminum is adopted as the material of the body, and due to its structure, it realizes weight saving of the trigger type airbrush which tends to be heavy.
- The needle packing adopts Teflon made, and the durability to lacquer type solvent has also been made thorough.

(Note) This product is a product specification that consumes more air than general airbrush. Therefore, the continuous operating pressure during the airbrush operation will be lower than the pressure value set for the compressor itself. In order to work comfortably, we recommend that you use it in combination with an air compressor or air tank with high air pressure or discharge volume.

[Product Summary]
- Nozzle aperture: 0.7 mm
- Cup capacity: 7 cc / 15 cc (replaceable type)
- Trigger type
- With needle adjuster
- Air hose mounting part: S screw specification
- Built-in Teflon-processed needle packing
- Needle cap: 2 types included (flat / perforated)

- Product material Body: Aluminum alloy, brass, ABS etc
- Size Product Body: Approximately 155 × 145 × 30 mm
- Product weight: Approx 175 g * When 15 cc cup is installed

- accessories
· 7 cup cup
· Needle cap (perforated type)
· Nozzle wrench
· Spigot joint