KATO 23-015-1 Unitrack Incline Pier Set 15-50mm (1/2``to

23-015-1 Unitrack Incline Pier Set 15-50mm (1/2``to2``) 1set. 

- This is a remanufactured product with changed accessories for part number <23-015>.
- From this product, overhead wire pillars will be included.
* <23-015> will be discontinued.
*The image is the previous product.

- A set of 2 piers each for No.1 to No.5. With 2 stairs.

[Usage of slope pier basic set]
- KATO's unitrack elevated system is a stable elevated system by adopting S joiner
can be easily assembled.
- This is a basic set used when creating a grade elevated section.
1. 7 elevated tracks are standard height (50mm).
2. Gradient is about 4% for straight line 248mm, about 5.4% for 186mm, about 4% for curved line R315-45, and about 4.5% for R282-45.
3. The surface gradient is about 2% with a straight track of 248 mm, both upward and downward.
4. The straight track 124mm and the elevated track 62mm are too steep, so it is not possible to use the slope piers as they are.
- When using, push it horizontally to connect it securely.
- When removing, gently fold left and right horizontally and pull out.
- Folding up and down may cause damage.

[Features of S Joiner]
- Reliable connection and disassembly with one touch. In addition, since the round pin shaft of the S joiner has the effect of holding the bridge pier vertically, it is possible to install the elevated track in the slope section stably.