Sanwa 107A54761A PGS-HX Servo

● SXR/SSL compatible programmable servo

This 1/12 servo uses PGS-HR as a base, with the upper case machined from aluminum, improving the accuracy of operation and the rigidity of the case.

※ Compatible with CODE10 (M17, MT-5, MT-R, M12S(RS), EXZES ZZ, MT-44)

Not compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)

● Compatible with MULTI SETTING GEAR

● New control system achieves 10 times faster operation response compared to SRG-HR/HS

● In addition to the factory setting data (USER), you can select three types of preset data, making it easier to adjust servo settings (compatible with MULTI SETTING GEAR)

※ The settings of the three types of preset data, type 1 to type 3, cannot be changed. ●Compatible with Extreme Response (SXR) mode
●Compatible with Ultra Response (SUR) mode
●Compatible with Super Response (SSR) mode
●Compatible with High Response (SHR) mode
●Designed specifically for 1/12 racing
●Full metal gear specification (reinforced type)

Speed ​​0.10sec/60°(6.0V), 0.16sec/60°(3.7V)
Torque: 5.8kg・cm(6.0V), 3.8kg・cm(3.7V)
Dimensions: 27.0ｘ12.1ｘ30.5mm
Weight: 23.0g

●SXR (Extreme Response) support provides twice the smoothness of SUR (Ultra Response) and the fastest tracking in the world.

When combined with compatible devices, it provides amazing smoothness and fine movement that you have never experienced before.

●MULTI SETTING GEAR support allows for expanded functionality, changing and saving the settings of each parameter, and firmware updates. (※Also possible with the M17's MULTI SETTING GEAR function)

●SSL and telemetry support. Each parameter can be wirelessly set and changed in real time from a transmitter that supports CODE10.

Temperature, current, and volume position data inside the servo can be transmitted to a compatible transmitter via telemetry.

PGS-HX servo leads and Z connector housings are finished in black.
*PGS servo settings can be changed using a combination of a CODE10 compatible transmitter (M17, M12S (RS), EXZES ZZ, MT-5, MT-44) and an SSL compatible receiver (RX-493i, RX-492i, RX-493, RX-492, RX-491, RX-49T, RX-472, RX-482, RX-47T), or using the MULTI SETTING GEAR. ■Response settings when using PGS servos The PGS servo's SSL (Sanwa Synchronized Link) response and each response mode (NOR, SHR, SSR, SUR) operation are different. When using each response mode, set the MULTI SETTING GEAR and then connect to CH1/CH2. ■The servo's internal temperature, current, voltage, and volume position data can be transmitted to the transmitter via telemetry, so the servo's status can be checked at any time. *Initial settings with MULTI SETTING GEAR are required.
■Settings:◯SSL-CH (SSL channel setting) ◯TYPE (Type setting) ◯STRETC (Stretcher adjustment)
◯BOOST (Boost adjustment) ◯D-BAND (Deadband adjustment) ◯MV-MID (Mid-range torque change adjustment)
◯MV-END (Late-range torque adjustment) ◯BRAKE (Brake adjustment)
●MV-HOLD (Full-range power adjustment) ●MV-FRQ (Full-range feeling adjustment)
●MAX-PW (MAX duty adjustment)
*MULTI SETTING GEAR is required to set ●.
(Can also be used with M17 MULTI SETTING GEAR)
*When using FH5U or SXR response mode, telemetry and SSL functions cannot be used.